8515 - Printer ZEBRA - Free user manual and instructions
Find the device manual for free 8515 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Barcode & Label Printer |
| Brand | Zebra |
| Model | 8515 |
| Printing Technology | Direct Thermal |
| Print Resolution | 203 dpi (8 dots/mm) |
| Print Speed | Up to 100 mm/s (4 inches per second) |
| Supported Media Width | 25 to 108 mm (1 to 4.25 inches) |
| Supported Media Types | Continuous, die-cut, tag stock |
| Sensors | Reflective and media gap sensor |
| Connectivity | USB, Serial (RS-232), Parallel (IEEE 1284) |
| Dimensions (W x D x H) | 200 mm x 150 mm x 150 mm (approx.) |
| Weight | 1.5 kg (approx.) |
| Power Supply | 100-240V AC, 50-60 Hz |
| Operating Temperature | 5°C to 40°C |
| Main Functions | High-quality barcode, label and tag printing |
| Maintenance and Cleaning | Clean printhead and platen roller regularly |
| Safety | Use only the approved AC adapter |
| Spare Parts and Repairability | Printhead, platen roller, label sensor available |
| General Information | User manual in PDF (136 pages, English) |
Frequently Asked Questions - 8515 ZEBRA
How do I install the Zebra 8515 driver on my computer?
Download the latest driver from the Zebra website, run the setup, and connect the printer via USB or parallel cable when prompted. Use the Windows or macOS compatible driver for reliable operation.
How do I load labels into the Zebra 8515?
Open the printhead latch, insert the label roll on the supply spindle, thread the labels beneath the sensor and through the platen roller, and close the latch until it clicks. Make sure the media guides are adjusted to the label width.
How do I clean the printhead?
Turn off the printer and wait for it to cool down. Open the printhead and gently wipe it with a cotton swab moistened with isopropyl alcohol. Let it dry for at least one minute before closing and printing.
How do I calibrate the label sensor?
Press and hold the Feed button for about two seconds to automatically calibrate the media sensor. You can also send a calibration command from the Zebra driver to detect gaps and notches accurately.
What types of media can I use with the Zebra 8515?
This printer supports direct thermal labels, tags, and continuous paper rolls. Use media whose width is between 25 mm and 108 mm and ensure your labels are designed for thermal printers.
Why are my labels printing faded?
Increase the darkness setting in the printer driver, clean the printhead, and confirm the labels are placed on the correct side. Also check that the substrate is not expired or exposed to heat.
How do I replace the printhead?
Disconnect the power, open the latch, remove the screws holding the printhead, and carefully detach the ribbon cable. Install the new printhead by sliding it into place, reconnecting the cable and fastening the screws. Run a test print afterward.
How do I clear a paper jam?
Open the printhead and gently pull the jammed media free from the platen. Inspect the sensor area for debris, reload the label roll correctly, and close the latch before printing again.
How do I connect the Zebra 8515 to a network?
The 8515 has no integrated Ethernet port. To share it on a network, connect the printer to a print server or connect it to your computer and enable printer sharing in your operating system settings.
What regular maintenance does the Zebra 8515 need?
Clean the printhead and platen roller weekly, depending on usage. Remove lint and adhesive residue with alcohol, and check the sensor regularly to ensure consistent label detection.
User questions about 8515 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual 8515 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 8515 by ZEBRA.
USER MANUAL 8515 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : 8515
Category : Printer