CYBER FX 360 DPN US - Car alarm Positron - Free user manual and instructions
Find the device manual for free CYBER FX 360 DPN US Positron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Alarm System |
| Compatibility | Universal 12V vehicles |
| Control Unit Dimensions | Approx. 120 x 80 x 30 mm |
| Weight | Approx. 200 g |
| Power Supply | 12V DC vehicle battery |
| Working Frequency | 433.92 MHz |
| Remote Range | Up to 1500 m (line-of-sight) |
| Siren Output | 120 dB electronic siren |
| Shock Sensor | Dual-zone, adjustable sensitivity |
| Immobilizer | Engine immobilizer relay output |
| Central Locking | Integration with vehicle central locking |
| Additional Functions | Panic mode, valet mode, anti-hijack |
| LED Status Indicator | Blinks to show arming state |
| Operating Temperature | -40°C to +85°C |
| Certifications | CE, FCC |
| Installation | Professional installation recommended |
| Maintenance | Check siren and sensors periodically; clean remote control with dry cloth |
| Spare Parts Available | Replacement remotes, siren, shock sensor |
| Warranty | 1 year limited |
Frequently Asked Questions - CYBER FX 360 DPN US Positron
How do I arm and disarm the Positron CYBER FX 360 DPN US car alarm?
To arm, press the lock button on the remote control. To disarm, press the unlock button. The LED indicator will flash to confirm the system is armed.
What should I do if the remote control is not working?
First, check if the battery in the remote is discharged. Replace it with a CR2032 coin cell. If it still fails, reprogram the remote according to the manual. If the problem persists, consult a professional installer.
How do I adjust the shock sensor sensitivity?
Locate the shock sensor box. Turn the adjustment screw clockwise to increase sensitivity or counterclockwise to decrease. Test by tapping the vehicle.
Can I install the alarm myself?
While the alarm is designed for universal compatibility, professional installation is strongly recommended to ensure proper wiring, safety, and correct integration with the vehicle's central locking and immobilizer.
Does the alarm have an engine immobilizer?
Yes, the CYBER FX 360 DPN US includes an engine immobilizer relay output that prevents the engine from starting when the alarm is armed.
How do I replace the remote control battery?
Use a small screwdriver to open the remote casing. Remove the old battery and insert a new CR2032 battery with the correct polarity. Close the casing and test.
What is the maximum range of the remote?
The remote operates on 433.92 MHz with a line-of-sight range of up to 1500 meters. Obstacles and environmental factors can reduce the range.
How can I temporarily disable the alarm (valet mode)?
Enter valet mode using the valet switch or a sequence on the remote control (see manual). This will disable auto-arming while still allowing the vehicle to be driven.
What should I do if the alarm triggers randomly?
Random triggers are usually caused by a too-sensitive shock sensor or a faulty door switch. Reduce the shock sensor sensitivity and verify all door, hood, and trunk switches are properly closed.
Where is the control unit installed?
The control unit is typically mounted under the dashboard or in a hidden location to prevent tampering. Ensure it is secured away from heat sources and water.
User questions about CYBER FX 360 DPN US Positron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car alarm in PDF format for free! Find your manual CYBER FX 360 DPN US - Positron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CYBER FX 360 DPN US by Positron.
USER MANUAL CYBER FX 360 DPN US Positron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Positron
Model : CYBER FX 360 DPN US
Category : Car alarm