CENTRAL HM264RF - Alarm system Positron - Free user manual and instructions
Find the device manual for free CENTRAL HM264RF Positron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Alarm Control Panel |
| Brand | Positron |
| Model | CENTRAL HM264RF |
| Frequency Band | 868 MHz RF |
| Wireless Protocol | Proprietary Positron RF |
| Number of Zones | 8 |
| Maximum Wireless Devices | 32 |
| Power Supply | AC 110-240V 50/60Hz |
| Backup Battery | 12V 2.3Ah rechargeable |
| Alarm Output | Built-in siren, 110 dB |
| Remote Control | Keyfob included |
| Dimensions | 210 x 160 x 45 mm |
| Weight | 420 g |
| Operating Temperature | -10°C to +50°C |
| Mounting Type | Wall mount |
| Display | LCD with backlight |
| Keypad | Integrated numeric keypad |
| Installation | DIY, user friendly |
| Certifications | CE, RoHS |
| Maintenance | Periodic battery and sensor check |
| Cleaning | Wipe with dry cloth |
| Spare Parts | Available via authorized service |
| Repairability | Modular design, replaceable battery |
| General Information | Suitable for apartments and small offices |
Frequently Asked Questions - CENTRAL HM264RF Positron
How do I put the Positron CENTRAL HM264RF into programming mode?
Press and hold the 'Prog' key for 3 seconds. The display will show 'SETUP'. Then enter the installer code (default: 1234) to configure sensors and settings.
What should I do if a sensor does not trigger the alarm?
Check the sensor battery and its placement. Ensure it is within the specified RF range (100 meters in open field). Re-register the sensor by removing the device from the panel and re-pairing it using the ID code.
How can I temporarily disable the alarm system?
Press the 'Home' mode button or enter an option to deactivate the interior detectors while keeping perimeter protection. For full deactivation, enter your user code and select 'Disarm'.
How do I change the master code?
Go to 'Options' > 'Codes' > 'Master Code'. Enter the current code, then the new 4-digit code twice. A confirmation beep will sound.
Is the Positron CENTRAL HM264RF compatible with smart home systems?
The panel provides a dry relay output and a simple RF interface. A smart home bridge can be connected through the onboard terminals, but no official API is provided. For advanced integration, please consult Positron support.
How do I perform a factory reset?
Disconnect the power, remove the battery, and press the reset button inside the panel for 10 seconds. Reconnect power. All settings will revert to defaults.
What does the 'RF jamming' warning mean?
The central unit has detected continuous RF interference that could block wireless signals. If the warning persists, inspect the environment for devices transmitting on the same frequency or a deliberate jammer.
How do I replace the backup battery?
Open the front cover, unplug the battery connector, and insert a new 12V 2.3Ah lead-acid battery. Close the cover and power the panel on to test.
Can I expand the system with more sensors?
Yes, the HM264RF supports up to 32 wireless devices. Additional PIR detectors, door sensors, and smoke detectors must be compatible with the Positron RF protocol.
What maintenance does the alarm system require?
Clean the panel enclosure with a dry cloth, test all sensors monthly, and replace batteries in sensors every 12 months or when the low battery indicator appears. The backup battery should be replaced every 2-3 years.
User questions about CENTRAL HM264RF Positron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual CENTRAL HM264RF - Positron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CENTRAL HM264RF by Positron.