AX 2000 - Receiver FBT - Free user manual and instructions
Find the device manual for free AX 2000 FBT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Receiver |
| Brand | FBT |
| Model | AX 2000 |
| Category | Receiver |
| Form Factor | 19-inch rack-mountable |
| Rack Units | 2U |
| Number of Channels | 2 |
| Frequency Response | 20 Hz to 20 kHz (plus or minus 0.5 dB) |
| Signal-to-Noise Ratio | greater than or equal to 100 dB |
| Total Harmonic Distortion | Less than 0.05% |
| Input Sensitivity | 0.775 V |
| Input Connectors | Balanced XLR, 1/4-inch TRS, RCA |
| Output Connectors | Speakon, XLR, RCA |
| Protection Features | Short-circuit, thermal, overload protection |
| Controls | Volume, input selector, power switch |
| Indicators | Power and signal LED indicators |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 50 W |
| Dimensions (W x H x D) | 483 x 88 x 300 mm |
| Weight | 5.5 kg |
| Operating Temperature | 0 degrees Celsius to 40 degrees Celsius |
| Included Accessories | Power cord, rack ears, user manual |
| Repairability | Standard tools required; spare parts available |
Frequently Asked Questions - AX 2000 FBT
How do I connect the FBT AX 2000 to my speakers?
Connect the speaker cables to the Speakon or XLR output connectors. Ensure the amplifier is off during connection. Use high-quality cables for optimal performance.
What audio sources can I plug into the AX 2000?
The AX 2000 accepts balanced and unbalanced audio sources through XLR, 1/4-inch TRS, and RCA inputs. Typical sources include mixers, audio interfaces, CD players, and wireless receivers.
Can I mount the AX 2000 in a professional equipment rack?
Yes, the AX 2000 is designed for 19-inch rack-mounting and occupies 2 rack units. Use the included rack ears and secure the unit with screws.
How should I clean the receiver?
Turn off and unplug the device. Use a soft, dry cloth to wipe the exterior. Do not use liquids or chemicals, as they may damage the finish and internal components.
What is the recommended power supply for the AX 2000?
The AX 2000 operates on a wide range of 100-240 V AC, 50/60 Hz. Ensure the power outlet provides a stable voltage and avoid using extension cords with excessive loads.
How do I connect the AX 2000 to a mixing console?
Use balanced XLR or 1/4-inch TRS cables from the mixer's auxiliary send or main output to the corresponding inputs on the AX 2000. Set the input selector to match the connector type.
Is the AX 2000 suitable for wireless microphone systems?
Yes, the AX 2000's balanced inputs are compatible with wireless microphone receivers. Connect the wireless mic receiver's output to the AX 2000's XLR input for a clean signal.
How do I prevent overheating?
Ensure proper ventilation around the device. Do not cover the cooling vents and maintain at least 10 cm of clearance above and below. For prolonged high-volume use, consider adding a cooling fan.
What should I do if there is no sound from the output?
Check all connections and ensure the input selector matches the source. Verify that the power is on and the volume is not set to zero. If the issue persists, test the speakers and cables with another device.
Are spare parts available for the AX 2000?
Yes, FBT provides spare parts for the AX 2000, including power supplies, connectors, and control knobs. Contact authorized FBT service centers for genuine replacement parts.
User questions about AX 2000 FBT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AX 2000 - FBT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AX 2000 by FBT.
USER MANUAL AX 2000 FBT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FBT
Model : AX 2000
Category : Receiver