Volcan

0130GV - Water heaters and boilers Volcan - Free user manual and instructions

Find the device manual for free 0130GV Volcan in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Volcan 0130GV - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Water Heater and Boiler
Brand Volcan
Model 0130GV
Energy Source Gas (Natural or LPG)
Tank Capacity 130 liters
Rated Power 24 kW
Mounting Type Wall-mounted
Dimensions (HxWxD) 1000 x 500 x 500 mm
Net Weight 40 kg
Electrical Supply 230 V / 50 Hz
Ignition Electronic ignition
Temperature Range 35°C to 60°C
Max Operating Pressure 8 bar
Thermal Efficiency 85%
Safety Features Flame failure device, overheat protection, pressure relief valve
Control Type Manual thermostat
Water Connections 1/2 inch BSP
Maintenance Descaling recommended annually
Spare Parts Availability Thermocouple, gas valve, thermostat
Warranty 2 years

Frequently Asked Questions - 0130GV Volcan

How do I adjust the water temperature on the Volcan 0130GV?
Use the manual thermostat on the front panel. Turn it to your desired setting between 35°C and 60°C.
What maintenance does the Volcan 0130GV require?
Perform annual descaling to remove limescale, check the anode rod, and inspect the pressure relief valve regularly.
What should I do if the pilot light goes out?
Turn off the gas, wait 5 minutes, then relight following the ignition instructions. If it fails, contact a qualified technician.
How do I drain the water heater for winter or repair?
Turn off the gas and water supply, open the drain valve at the bottom, and let the water flow out. Ensure the pressure is released first.
What is the warranty period for this model?
The Volcan 0130GV comes with a 2-year warranty covering manufacturing defects. Register your product for details.
Is it safe to install in a bathroom?
Yes, if it is a sealed combustion model. Ensure proper ventilation and follow local codes. If in doubt, consult a professional.
How do I reset the overheat protection?
The overheat protection automatically resets after cooling. If not, press the reset button on the thermostat. Check for issues first.
What gas types are supported?
The heater supports natural gas (NG) and liquefied petroleum gas (LPG). Conversion kits may be required.
How do I install the Volcan 0130GV?
Installation must be done by a licensed plumber. Mount the unit on a solid wall, connect water and gas pipes, and ensure proper venting.
Where can I find spare parts?
Genuine parts like thermocouple, gas valve, and thermostat are available from authorized dealers or online stores. Always use genuine parts.

User questions about 0130GV Volcan

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Water heaters and boilers in PDF format for free! Find your manual 0130GV - Volcan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 0130GV by Volcan.

USER MANUAL 0130GV Volcan

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Volcan

Model : 0130GV

Category : Water heaters and boilers