COM-870+ - Router Steren - Free user manual and instructions
Find the device manual for free COM-870+ Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Broadband Router |
| Brand | Steren |
| Model | COM-870+ |
| Wireless Standard | IEEE 802.11 b/g/n |
| Maximum Wireless Speed | 300 Mbps |
| Frequency Band | 2.4 GHz |
| Ethernet Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Antennas | 2 external detachable antennas (5 dBi) |
| LED Indicators | Power, WAN, LAN 1-4, WLAN |
| Security | WEP, WPA, WPA2, SPI firewall |
| Power Supply | 9V DC / 0.8 A adapter (included) |
| Dimensions | 200 x 150 x 30 mm (7.9 x 5.9 x 1.2 in) |
| Weight | 450 g (1 lb) |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Storage Temperature | -40 to 70 °C (-40 to 158 °F) |
| Operating Humidity | 10% to 90% non-condensing |
| Management | Web-based interface (HTTP) |
| Buttons | Reset, WPS |
| Maintenance | Keep vents clean, avoid moisture and direct sunlight |
| Reparability | No user-serviceable parts; contact Steren technical support |
| General Information | For home and small office networks |
Frequently Asked Questions - COM-870+ Steren
What is the default IP address to access the router's admin panel?
The default IP address is 192.168.1.1. Open a browser, enter this address, and use admin as the default username and password.
How do I reset my Steren COM-870+ to factory settings?
Locate the Reset button on the back panel. Use a paperclip to press and hold it for about 10 seconds until the power LED blinks. The router will reboot and return to factory defaults.
Does the COM-870+ support 5GHz Wi-Fi?
No, the COM-870+ operates only on the 2.4 GHz band. It supports IEEE 802.11 b/g/n standards with speeds up to 300 Mbps.
Can I connect a VPN on this router?
The built-in router does not have native VPN client support. However, you can configure VPN on individual devices, or set the router in bridge mode and connect a VPN-capable device.
How can I update the firmware of the Steren COM-870+?
Visit the official Steren support website, download the latest firmware for the COM-870+, then log into the router's web interface, go to System Tools > Firmware Upgrade, select the file and click Upgrade.
What is the maximum wireless speed of this router?
The maximum wireless speed is 300 Mbps when using compatible devices under ideal conditions. Real-world speeds may vary due to interference and distance.
How do I set up WPA2 encryption for my Wi-Fi?
Open the router's admin panel at 192.168.1.1, go to Wireless Settings > Security. Choose WPA2-PSK, set a password of at least 8 characters, and save.
What should I do if I forget my router admin password?
Perform a factory reset by holding the Reset button for 10 seconds. This will restore the default admin password, allowing you to reconfigure your network.
Can I use the COM-870+ as a network switch?
Yes. You can disable the DHCP server and connect the router to your main network via an Ethernet cable, turning it into a wireless access point or switch.
Does the router have a guest network feature?
It does not offer a dedicated guest network feature in the default interface. You can manually create a separate SSID with client isolation to achieve a similar effect.
User questions about COM-870+ Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual COM-870+ - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COM-870+ by Steren.
USER MANUAL COM-870+ Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : COM-870+
Category : Router