Moonki

MS-P112B - Loudspeaker Moonki - Free user manual and instructions

Find the device manual for free MS-P112B Moonki in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Moonki MS-P112B - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Wireless Loudspeaker
Brand Moonki
Model MS-P112B
Output Power 20 W RMS
Driver Unit 2-inch full-range driver
Frequency Response 80 Hz – 20 kHz
Connectivity Bluetooth 5.0, AUX-in, USB port
Built-in Battery Rechargeable 3600 mAh lithium-ion
Playback Time Up to 8 hours at 50% volume
Charging Time Approximately 3 hours via USB-C
Power Supply DC 5 V USB adapter (not included)
Controls Power, volume, play/pause, track selection
Microphone Built-in noise-cancelling microphone for hands-free calls
Dimensions 15.2 × 8.1 × 7.6 cm
Weight 520 g
Water Resistance IPX5 splash-proof
Cleaning Wipe with a soft dry cloth; avoid abrasive cleaners
Safety Do not expose to rain, humidity or heat sources
Repair No user-serviceable parts; contact qualified service
Documentation Free PDF manual available on the product page

Frequently Asked Questions - MS-P112B Moonki

How do I pair the Moonki MS-P112B with my phone?
Turn on the speaker and press the Bluetooth button until the indicator flashes. On your phone, enable Bluetooth and select "Moonki MS-P112B" from the available devices. The speaker will play a confirmation tone when paired.
Can I use the speaker while it is charging?
Yes, you can play audio while charging, but the battery may charge more slowly. To extend battery life, charge fully and disconnect before use.
How do I reset the speaker if it becomes unresponsive?
Power off the speaker, then press and hold the power button for 5 seconds. The indicator LED will flash, and the speaker will restart with factory defaults.
What audio sources are supported?
The speaker supports Bluetooth, AUX-in, and USB playback. You can connect smartphones, tablets, computers, and other devices using a 3.5 mm AUX cable or a USB drive.
How long does the battery last?
A fully charged battery provides up to 8 hours of playback at 50% volume. Playback time may vary depending on the audio level and content.
How do I clean the Moonki MS-P112B?
Use a soft lint-free cloth slightly dampened with water. Do not spray liquids directly on the speaker or use alcohol or abrasive cleaners.
Is the speaker waterproof?
The enclosure meets IPX5 splash-proof, so it withstands light rain and sweat, but do not submerge it in water.
What does the LED indicator mean?
A solid blue LED indicates Bluetooth is connected. A fast blinking blue LED indicates pairing mode; a red LED may indicate low battery or charging.
Can I connect two speakers together?
This model does not support TWS or multi-speaker pairing. To get stereo sound, connect each speaker to its own audio source with an AUX splitter.
Where can I find the user manual?
The free user manual is available for download as a PDF on the product page. You can also request a translated version by selecting your language and providing your email.

User questions about MS-P112B Moonki

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual MS-P112B - Moonki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MS-P112B by Moonki.

USER MANUAL MS-P112B Moonki

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Moonki

Model : MS-P112B

Category : Loudspeaker