eTermo PE-ETA1001S - Water heater Peabody - Free user manual and instructions
Find the device manual for free eTermo PE-ETA1001S Peabody in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric storage water heater |
| Brand | Peabody |
| Model | eTermo PE-ETA1001S |
| Capacity | 100 liters |
| Mounting | Vertical wall mounting |
| Rated voltage | 230 V ~ 50 Hz |
| Rated power | 2000 W |
| Temperature adjustment | 30 °C to 75 °C |
| Thermal insulation | Polyurethane foam |
| Heating element | Copper immersion type |
| Corrosion protection | Magnesium anode |
| Safety valve | Temperature and pressure relief valve |
| Safety features | Dry heating protection, overheating cut-off |
| Tank material | Enamel-lined steel |
| Dimensions (estimated) | 100 cm height, 45 cm diameter |
| Weight (estimated) | 28 kg |
| Maintenance | Regular descaling and anode replacement |
| Cleaning | Wipe with damp cloth |
| Repairability | Replaceable heating element, thermostat, and anode |
| Spare parts | Heating element, thermostat, anode, safety valve |
Frequently Asked Questions - eTermo PE-ETA1001S Peabody
How do I install the eTermo PE-ETA1001S water heater?
Installation must be performed by a qualified technician. Mount the unit vertically on a wall able to support its weight. Connect to cold water supply and 230 V electrical mains. Ensure the safety valve is fitted and discharge pipe is directed downward.
What is the tank capacity of this model?
The eTermo PE-ETA1001S has a 100-liter storage capacity, suitable for households with up to 3-4 people.
How long does it take to heat the full tank?
With a 2000 W heating element, heating 100 liters from 15 °C to 60 °C takes approximately 6 hours. Actual time depends on inlet water temperature.
How do I adjust the temperature?
Turn the thermostat dial located near the bottom of the unit. Recommended setting is 60 °C to prevent scalding and reduce limescale. Wait for the temperature to stabilize before measuring.
What maintenance does the water heater require?
Regularly drain the tank to remove sediment, descale the heating element, and inspect the magnesium anode every year. Replace the anode if severely corroded to protect the tank.
What should I do if the water is not heating?
Check the circuit breaker and reset if necessary. Verify that the thermostat is set correctly. If still no hot water, the heating element may be faulty and should be tested/replaced by a technician.
Is it safe to leave the heater on continuously?
Yes, the unit features overheating protection and a temperature-pressure relief valve. However, switching off when not in use can save energy.
Can I use this water heater in a bathroom?
It is designed for indoor installation and has IPX4 splash-proof protection, making it suitable for bathroom zones subject to water splashes.
What warranty is provided?
Peabody typically offers a 2-year manufacturer warranty. Keep the purchase receipt and register the product online if required.
Where can I find spare parts?
Spare parts such as heating elements, thermostats, anodes, and safety valves are available from authorized Peabody service centers and reputable online spare-part retailers.
User questions about eTermo PE-ETA1001S Peabody
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual eTermo PE-ETA1001S - Peabody and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. eTermo PE-ETA1001S by Peabody.
USER MANUAL eTermo PE-ETA1001S Peabody
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Peabody
Model : eTermo PE-ETA1001S
Category : Water heater