Koblenz

PSK-200S - Heating Koblenz - Free user manual and instructions

Find the device manual for free PSK-200S Koblenz in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Koblenz PSK-200S - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Fan Heater
Brand Koblenz
Model PSK-200S
Power Source Electric
Voltage 120V AC
Wattage 1500W
Heating Element PTC Ceramic
Temperature Control Adjustable Thermostat
Safety Features Overheat Protection, Tip-Over Switch
Dimensions 8.6 x 6.1 x 10.8 inches
Weight 3.5 lbs
Cord Length 6 feet
Controls Manual Dial
Housing Material ABS Plastic
Noise Level Approximately 50 dB
Suitable Room Size Up to 200 sq ft
Cleaning Wipe with a dry cloth
Certifications ETL Listed

Frequently Asked Questions - PSK-200S Koblenz

How do I turn on the Koblenz PSK-200S heater?
Plug the heater into a standard 120V outlet, then turn the power dial from the OFF position to the desired heat setting. The indicator light will turn on.
What should I do if the heater doesn't produce warm air?
Check that the thermostat is set higher than the current room temperature. Also ensure the air intake and outlet are not blocked. If the problem persists, verify that the safety switch hasn't tripped.
Can I use this heater in a bathroom?
No. This heater is rated for indoor dry locations only and should not be used in high-humidity environments like bathrooms without proper IP rating.
How do I clean the PSK-200S?
Always unplug the heater and let it cool down. Wipe the exterior with a soft, dry cloth. Do not use water or liquid cleaners, and never immerse the unit.
Does the heater have an automatic shut-off?
Yes, it includes overheat protection and a tip-over switch that automatically shuts off the heater under those conditions.
How large of a room can this heater effectively warm?
The PSK-200S is designed to heat rooms up to 200 square feet (approximately 18.6 square meters) depending on insulation and ambient temperature.
How do I adjust the temperature?
Set the thermostat dial to the desired temperature. The heater will cycle on and off to maintain that temperature.
Is this heater quiet enough for a bedroom?
With a noise level around 50 dB, it is comparable to a quiet conversation, making it suitable for most bedrooms at lower settings.
What should I do after the safety switch trips?
Unplug the heater, inspect it for blockages or damage, and allow it to cool down. After clearing any obstruction, plug it back in and press the reset button if available.
Can I leave the heater running unattended overnight?
It is not recommended to leave any space heater unattended. Always turn it off when you leave the room or go to sleep.

User questions about PSK-200S Koblenz

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual PSK-200S - Koblenz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSK-200S by Koblenz.

USER MANUAL PSK-200S Koblenz

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Koblenz

Model : PSK-200S

Category : Heating