POD-176 - Bluetooth audio receiver Steren - Free user manual and instructions
Find the device manual for free POD-176 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Bluetooth audio receiver |
| Brand | Steren |
| Model | POD-176 |
| Bluetooth version | Bluetooth 5.0 |
| Wireless range | Up to 10 meters (33 ft) |
| Audio output connector | 3.5 mm stereo jack |
| Power input | USB 5V DC |
| Built-in battery | Rechargeable lithium battery |
| Battery capacity | 200 mAh |
| Battery playtime | Up to 6 hours |
| Charging time | Approximately 2 hours |
| Frequency response | 20 Hz - 20 kHz |
| Signal-to-noise ratio | Greater than 80 dB |
| Dimensions | 45 x 45 x 12 mm (1.8 x 1.8 x 0.5 in) |
| Weight | 20 g (0.7 oz) |
| Controls | Play/pause, previous/next track, volume |
| LED indicator | Status signal for pairing and charging |
| Included accessories | USB cable, 3.5 mm audio cable |
| Compatible devices | Smartphones, tablets, computers, TV, car audio |
| Maintenance | Clean with a dry, soft cloth |
| Safety warnings | Do not expose to water or extreme heat |
| Repair information | Contact authorized Steren service center |
| Certifications | FCC, CE |
Frequently Asked Questions - POD-176 Steren
How do I pair the Steren POD-176 with my phone?
Turn on the receiver and press the pairing button until the LED blinks quickly. On your phone, enable Bluetooth, search for POD-176, and select it. The LED will turn solid when connected.
Can I use this receiver with a car stereo?
Yes, connect the 3.5 mm audio cable from the receiver to the AUX input of your car stereo. Then pair your phone and stream audio through the car speakers.
How do I charge the built-in battery?
Use the included USB cable and plug it into a 5V USB power source, such as a phone charger or computer port. The LED indicator shows charging status; a full charge takes about 2 hours.
Why is there no sound from my connected speaker?
Check that the receiver is paired and the volume on both the phone and the audio system is turned up. Make sure the 3.5 mm cable is firmly connected to the audio input of the speaker or stereo.
How long does the battery last on a full charge?
A fully charged 200 mAh battery provides up to 6 hours of continuous audio playback. Actual playtime varies with volume and signal strength.
Can I connect two devices at the same time?
The POD-176 is primarily designed for one active connection. It remembers previously paired devices, but only one source can stream audio at a time.
What is the maximum wireless range?
The wireless range is up to 10 meters (33 feet) in open area. Walls and obstacles can reduce the range.
Does the POD-176 require special drivers or software?
No, the receiver is plug-and-play. It appears as a standard Bluetooth device and does not require special drivers on smartphones, tablets, or computers.
How do I reset the device if it stops responding?
If the device freezes, turn it off and on again. For a full reset, connect it to a charger and press and hold the pairing button for 10 seconds until the LED flashes.
How should I clean and maintain the POD-176?
Use a dry, soft cloth to wipe the casing. Do not use water, solvents, or cleaning sprays. Store it in a cool, dry place and protect it from moisture and heat.
User questions about POD-176 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bluetooth audio receiver in PDF format for free! Find your manual POD-176 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POD-176 by Steren.
USER MANUAL POD-176 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : POD-176
Category : Bluetooth audio receiver