DS-KABD8003-RS3/S - Intercom Hikvision - Free user manual and instructions
Find the device manual for free DS-KABD8003-RS3/S Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Door Station (Video Intercom) |
| Brand | Hikvision |
| Model | DS-KABD8003-RS3/S |
| Category | Intercom System |
| Mounting Type | Wall-mounted / Flush mount |
| Video Camera | 1/2.7" Progressive Scan CMOS |
| Video Quality | 1080p HD / 2MP |
| Viewing Angle | 180° horizontal field of view |
| Audio Features | Two-way audio with echo cancellation and noise reduction |
| Night Vision | Yes, with built-in IR LEDs (up to 10m) |
| Door Release | Electric door lock control (NO/COM relay contacts) |
| Power Supply | 12V DC or PoE (IEEE 802.3af) |
| Power Consumption | ≤ 5 W |
| Operating Temperature | -30 °C to +60 °C |
| Dimensions (W x H x D) | 245 mm x 100 mm x 40 mm |
| Weight | 0.8 kg |
| Housing Material | Aluminum alloy with weatherproof gaskets |
| Protection Rating | IP65 (waterproof) and IK08 (impact resistant) |
| Network Connection | RJ45 10/100Mbps Ethernet, RS-485 |
| Maintenance | Clean with dry cloth; inspect gaskets periodically |
| Safety | Password protection, secure TLS/SRTP communication |
| Spare Parts Availability | Available via Hikvision authorized service centers |
| Repairability | Modular components for easy field replacement |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - DS-KABD8003-RS3/S Hikvision
How do I install the DS-KABD8003-RS3/S door station?
First, power off the system. Mount the device at a height of about 1.5 meters using the included bracket. Connect the wires for power, network, and door release according to the wiring diagram. Use IP65-rated connectors for outdoor cables. Finally, screw the device onto the bracket and power on.
Can I connect the door station to my smartphone?
Yes, if you use a compatible Hikvision intercom monitor or the Hik-Connect app. The door station supports remote video intercom features via IP network, allowing you to see and talk to visitors from your smartphone.
How do I adjust the camera angle?
The camera is mounted in a fixed position, but you can slightly pivot the camera unit by unscrewing the side adjustment screws to optimize the viewing angle. Do not force the movement beyond the indicated range.
What is the recommended wiring for the door release?
Use a 12V DC or 24V DC electric strike depending on your lock type. Connect the door release wire to the corresponding NO/COM terminals on the rear panel. Ensure the power rating of the lock does not exceed the maximum current output of the door station (typically 500mA).
How do I reset the device to factory settings?
To reset, press and hold the RST button for about 10 seconds while the device is powered on. The device will reboot and restore the default factory configuration, including IP address and password. Note that all user settings will be lost.
How often should I clean the device and with what?
Clean the device once every 3 months to maintain good performance. Use a soft, dry microfibre cloth to wipe the surface. Avoid water, solvents, and abrasive cleaners. For the camera lens, use a lens cleaning pen to gently remove dust.
Is the device waterproof?
Yes, the device has an IP65 ingress protection rating, meaning it is dust-tight and protected against water jets. It can withstand rain and outdoor weather conditions, but it should not be submerged.
Can I use the door station with other Hikvision monitors?
Yes, the DS-KABD8003-RS3/S is compatible with Hikvision intercom monitors that support the same protocol (e.g., DS-KH8300 series). For non-Hikvision systems, you may need a SIP gateway to enable interoperability.
What is the maximum cable length for power supply?
For a 12V DC power supply, the maximum recommended cable length is 30 meters using 24 AWG twisted pair. If you need a longer cable, use a higher voltage (e.g., 24V) or reduce the load. For PoE, the cable length can be up to 100 meters as per Ethernet standards.
How do I troubleshoot poor audio quality?
Start by checking the microphone and speaker for any obstruction. Verify the network bandwidth – at least 1 Mbps is recommended for audio. Adjust the volume levels in the device settings. Also, ensure that the wiring is shielded and not running parallel to power lines.
User questions about DS-KABD8003-RS3/S Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual DS-KABD8003-RS3/S - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-KABD8003-RS3/S by Hikvision.
USER MANUAL DS-KABD8003-RS3/S Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-KABD8003-RS3/S
Category : Intercom