Philco

PC900SLE - Range hood Philco - Free user manual and instructions

Find the device manual for free PC900SLE Philco in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Philco PC900SLE - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Philco
Model PC900SLE
Product Type Wall-mounted range hood
Width 90 cm
Finish Stainless steel
Controls Touch control panel
Number of Speeds 3
Max Extraction Rate 750 m³/h
Noise Level (max) 68 dB
Lighting 2 x LED lamps
Grease Filter Aluminum filter
Charcoal Filter Optional, for recirculation mode
Ducting Diameter 150 mm
Rated Power 220-240 V ~ 50 Hz
Power Consumption 180 W
Mounting Wall-mounted
Energy Class B
Dimensions (H x W x D) 600 x 900 x 430 mm
Weight 16 kg
Safety Features Overheat protection
Maintenance Filters washable; charcoal filter replaceable
Spare Parts Availability Available from manufacturer
Repair Index High repairability
Warranty 2 years

Frequently Asked Questions - PC900SLE Philco

How do I clean the grease filter on the Philco PC900SLE?
Remove the aluminum grease filter and wash it with warm soapy water or in the dishwasher. Allow it to dry completely before reinserting. Clean it monthly or when the filter indicator signals.
How can I replace the LED lamps?
First, disconnect the hood from the power supply. Gently pry out the old LED lamp from its housing, unplug it, and insert the new one. Make sure the replacement has the same wattage and type.
Does the range hood support recirculation mode?
Yes, the PC900SLE can be used in recirculation mode with an optional charcoal filter. Install the charcoal filter over the grease filter and ensure the output vents are open.
What duct size is recommended for installation?
Use a duct with a diameter of 150 mm for optimal airflow. Smaller ducts can reduce extraction efficiency and increase noise.
How should I install the hood correctly?
The hood must be mounted at a height of 65-75 cm above an electric cooktop and 75-85 cm above a gas cooktop. Secure the mounting bracket to a solid wall, then hang the hood and connect the ducting.
Why is my range hood making excessive noise?
Check that the ductwork is not blocked or kinked. Ensure the hood is properly installed and not vibrating. Clean the filters regularly, as clogged filters can increase noise.
How do I operate the touch controls?
The touch panel features buttons for power, speed selection, and lighting. Tap the power button to turn on, use the speed buttons to adjust extraction, and the light button to toggle the LED lamps.
What regular maintenance does the hood require?
Regularly clean the grease filter every 1-2 months, wipe the surfaces with a damp cloth, and replace the charcoal filter every 3-4 months if used in recirculation mode.
Are spare parts available for this model?
Yes, spare parts such as filters, lamps, and control boards are available through Philco authorized service centers or online retailers. Always order genuine parts for compatibility.
How can I reset the filter alarm indicator?
After cleaning or replacing the filters, press and hold the light button for 3 seconds until the indicator turns off. This resets the alarm cycle.

User questions about PC900SLE Philco

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual PC900SLE - Philco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PC900SLE by Philco.

USER MANUAL PC900SLE Philco

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Philco

Model : PC900SLE

Category : Range hood