PIC-605 - Uncategorized Steren - Free user manual and instructions
Find the device manual for free PIC-605 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Outlet Timer |
| Brand | Steren |
| Model | PIC-605 |
| Display Type | LCD digital display |
| Number of Programs | 8 ON/OFF programs per day |
| Program Cycle | 24-hour, repeatable |
| Maximum Load | 10 Amps, 120 VAC / 2200W |
| Power Supply | 120V AC, 60Hz |
| Backup Battery | Rechargeable Ni-MH (keeps settings during power loss) |
| Dimensions (approx.) | 3.5 x 2.5 x 1.5 inches |
| Weight (approx.) | 0.5 lbs |
| Manual Override | Quick manual on/off switch |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Installation | Plugs directly into a standard wall outlet |
| Maintenance | Clean with a soft dry cloth; do not use liquids |
| Safety | Do not exceed rated load; avoid water and extreme heat |
| Spare Parts & Reparability | No user-serviceable internal parts; contact Steren service center |
| General Information | Complies with UL/CSA standards; for indoor use only |
Frequently Asked Questions - PIC-605 Steren
How do I set the current time on the PIC-605?
Press the Clock button, then use Hour and Minute buttons to adjust the time. Hold the button for fast-forward. Press Clock again to confirm.
How many ON/OFF programs can I set per day?
You can set up to 8 different ON/OFF programs per day. Each program can be assigned its own hour and minute.
What happens if the device loses power?
The built-in rechargeable Ni-MH battery keeps your programmed settings for a limited time. After a prolonged outage, you may need to reprogram the timer.
Can I override the program manually?
Yes, press the Manual Override button to temporarily turn the connected appliance on or off regardless of the programmed schedule. The next program will resume automatically.
What is the maximum load for this timer?
The maximum load is 10 Amps at 120 VAC, equivalent to 2200 watts. Never exceed this limit to avoid overheating.
Can I use the timer with a 220V supply?
No, this model is designed for 120V AC 60Hz only. Using it with 220V can cause severe damage and voids the warranty.
How do I reset the timer to factory settings?
Press the Reset button with a pointed object (like a pin) for 2 seconds. This clears all programs and returns the clock to 12:00.
Why does my device not turn on even though the timer is set?
Check that the outlet is live, the appliance is plugged in, the timer is set to Auto mode, and the scheduled time matches the current time. Also verify the program is turned on (not deleted).
Is the PIC-605 suitable for outdoor use?
No, this timer is intended for indoor use only. Keep it away from rain, moisture, and direct sunlight.
How do I clean the timer?
Disconnect the timer from the outlet and wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
User questions about PIC-605 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PIC-605 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PIC-605 by Steren.
USER MANUAL PIC-605 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : PIC-605
Category : Uncategorized