CMPUV601SSX0 - Doorbell Mabe - Free user manual and instructions
Find the device manual for free CMPUV601SSX0 Mabe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Doorbell |
| Brand | Mabe |
| Model | CMPUV601SSX0 |
| Color | Stainless Steel |
| Wireless Range | Up to 150 meters (490 feet) |
| Power Source | Battery operated (button) and plug-in (receiver) |
| Battery Type | 1 x 3V CR2032 for transmitter |
| Operating Voltage | 3V DC (transmitter) / 120V AC (receiver) |
| Number of Ringtones | 20 selectable melodies |
| Volume Levels | 5 adjustable levels |
| Water Resistance | IP44 splash-proof |
| Operating Temperature | -20°C to 50°C |
| Dimensions (Button) | 3.5 x 1.8 x 1.5 inches |
| Dimensions (Receiver) | 4.1 x 2.8 x 1.2 inches |
| Total Weight | 0.3 lbs (136 g) |
| Installation | Wall-mounted, no wiring required |
| Included Components | Doorbell button, chime receiver, mounting hardware, user manual |
| Maintenance and Cleaning | Wipe with a dry, soft cloth |
| Spare Parts and Repairability | Replaceable battery and receiver module |
| Safety Certifications | CE, FCC certified |
Frequently Asked Questions - CMPUV601SSX0 Mabe
How do I install the Mabe CMPUV601SSX0 doorbell?
The installation is wireless and requires no wiring. Simply mount the button using the included screws or adhesive tape at your door, and plug the chime receiver into an indoor power outlet. Ensure the devices are within the specified range.
How do I adjust the volume of the chime?
Use the volume control on the side of the receiver. You can select from 5 different volume levels to suit your environment.
How do I replace the battery in the doorbell button?
The button uses a 3V CR2032 battery. Open the back cover of the button, remove the old battery, and insert a new one with the positive side facing up. The receiver will indicate low battery with an LED.
What is the wireless range of this doorbell?
The doorbell has a wireless range of up to 150 meters in open air. Walls and obstacles may reduce the range.
Is the doorbell weatherproof?
Yes, the outdoor button is IP44 splash-proof, meaning it is protected against water splashes from any direction. It is suitable for outdoor use.
How do I change the ringtone?
Press the ringtone button on the receiver to cycle through the 20 built-in melodies. Press and hold to switch to the next melody quickly.
What should I do if the doorbell stops working?
First, check the battery in the button and replace it if needed. Then ensure the receiver is plugged in and near the button. If the issue persists, try re-syncing the button and receiver by holding the pairing button.
How do I clean the doorbell?
Use a dry, soft cloth to wipe the button and receiver. Do not use water, abrasive cleaners, or solvents, as these can damage the device.
Can I use multiple receivers with one button?
Yes, you can add additional receivers by pairing them with the same button. This allows you to hear the chime in different areas of your home.
How do I sync the button and the receiver?
If the devices are not responding, press and hold the pairing button on the receiver for 3 seconds, then press the doorbell button. The LED will flash to confirm successful pairing.
User questions about CMPUV601SSX0 Mabe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Doorbell in PDF format for free! Find your manual CMPUV601SSX0 - Mabe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMPUV601SSX0 by Mabe.
USER MANUAL CMPUV601SSX0 Mabe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mabe
Model : CMPUV601SSX0
Category : Doorbell