Fixed Dome FD8179-H - Security Camera Vivotek - Free user manual and instructions
Find the device manual for free Fixed Dome FD8179-H Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Vivotek |
| Model | Fixed Dome FD8179-H |
| Category | Security Camera |
| Image Sensor | 1/2.7" Progressive CMOS |
| Maximum Resolution | 5 Megapixels (2560 x 1920) |
| Lens | Fixed lens, 3.6mm, F1.8 |
| Night Vision | IR LEDs, up to 30m |
| Video Compression | H.265, H.264, MJPEG |
| Network Interface | 10/100 Mbps Ethernet |
| Power Supply | PoE (IEEE 802.3af) / 12V DC |
| Protection Rating | IP67 |
| Operating Temperature | -40°C to 50°C |
| Mounting Type | Ceiling mount |
| Housing Material | Aluminum alloy |
| Dimensions | Ø 135 mm x 105 mm |
| Weight | 650 g |
| Storage | MicroSD card slot, up to 128GB |
| Smart Features | Motion detection, privacy mask, tamper detection |
| Included Accessories | Mounting bracket, screw kit, L-type hex key, quick start guide |
Frequently Asked Questions - Fixed Dome FD8179-H Vivotek
How to reset the Vivotek FD8179-H camera to factory defaults?
Press and hold the reset button on the camera for about 10 seconds using a pin, then release. The camera will reboot with default settings. Be aware that this also resets the IP address to the factory default.
What is the default IP address and login credentials?
The default IP address is 192.168.0.99. The default username is admin and the password is blank. It is strongly recommended to change the password after the first login.
How to access the camera remotely over the internet?
Set up port forwarding on your router for ports 80 (HTTP) and 554 (RTSP). Then access using your public IP address. For security, use HTTPS and strong passwords. Alternatively, use Vivotek's cloud service if supported.
How to configure motion detection on the FD8179-H?
Log in to the web interface, go to Configuration > Motion Detection. Enable it, define detection regions, adjust sensitivity and threshold, and set trigger actions like email alerts or recording.
Can this camera be used outdoors?
Yes, the camera has an IP67 rating and is weatherproof, making it suitable for outdoor use. Ensure all cables are properly sealed to maintain waterproofing.
How to install the camera on a ceiling?
Use the included mounting bracket. Mark the screw holes on the ceiling, drill pilot holes, insert wall anchors, then secure the bracket. Connect the Ethernet cable, attach the camera to the bracket, and adjust the viewing angle. Finally, tighten the screws to lock it in place.
How to update the firmware?
Download the latest firmware from the Vivotek website, log into the camera web interface, go to Maintenance > Firmware Upgrade, choose the file, and click Upload. Do not disconnect power during the upgrade.
What should I do if the camera is not showing any video?
Check the Ethernet cable connection and the PoE power supply. Verify the IP address is correct and that the camera is accessible via ping. Also check if the lens cap is removed and the camera is properly focused.
How to clean the dome cover?
Use a soft, dry microfiber cloth to gently wipe the dome. If necessary, use a small amount of lens cleaner. Avoid abrasive materials that could scratch the dome, reducing image quality.
Can I store recordings locally on the camera?
Yes, the camera supports a MicroSD card up to 128GB for local storage. You can configure recording schedules and events to save footage directly to the card.
User questions about Fixed Dome FD8179-H Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Fixed Dome FD8179-H - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fixed Dome FD8179-H by Vivotek.