POD-143 - Wireless Headphones Steren - Free user manual and instructions
Find the device manual for free POD-143 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Headphones |
| Brand | Steren |
| Model | POD-143 |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | Up to 10 meters |
| Driver Size | 40 mm dynamic drivers |
| Frequency Response | 20 Hz – 20 kHz |
| Impedance | 32 Ohms |
| Battery Capacity | 250 mAh rechargeable |
| Battery Life | Up to 8 hours of music playback |
| Charging Port | Micro USB |
| Weight | Approximately 180 g |
| Dimensions | 160 × 160 × 60 mm (foldable design) |
| Controls | Integrated buttons for play, pause, calls and volume |
| Microphone | Built-in with echo cancellation |
| Compatibility | iOS, Android, Windows and macOS devices |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Keep away from water and heat sources |
| Spare Parts | Available at Steren authorized service centers |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - POD-143 Steren
How do I pair my Steren POD-143 wireless headphones with my smartphone?
Turn on the headphones by pressing and holding the power button until the LED flashes blue and red. Then enable Bluetooth on your phone and select POD-143 from the available devices list.
How long does it take to fully charge the headphones?
Charging takes approximately 2 hours using the included Micro USB cable. A full charge gives up to 8 hours of continuous playback.
Can I use the headphones while they are charging?
Yes, the POD-143 supports passive wired use if connected via the 3.5 mm audio cable, but Bluetooth playback while charging is not recommended to avoid battery stress.
Are these headphones water-resistant?
No, the POD-143 is not fully waterproof. It has a splash-resistant design, but you should avoid submerging it in water or using it during heavy rain.
Why is the sound only coming from one earcup?
First check the audio balance on your source device. Then ensure the earcups are properly seated. If the issue persists, try resetting the headphones by turning them off and on again.
How do I reset the Steren POD-143?
If the headphones behave erratically, place them in pairing mode and press the multifunction button 5 times rapidly. The LED will flash white to confirm the reset. Re-pair your devices afterward.
Can I use the headphones with a computer?
Yes, the POD-143 works with any Bluetooth-capable computer running Windows or macOS. Alternatively, you can use the included 3.5 mm audio cable for a wired connection.
What should I do if the headphones do not appear in the Bluetooth list?
Make sure the headphones are in pairing mode (LED flashing) and within range. If they still don't appear, forget any previous connection on your device and try again. A reset may be necessary.
How should I clean the ear cushions?
Remove the ear cushions if possible and wipe them with a damp lint-free cloth. Avoid using harsh chemicals. Let them air-dry completely before reattaching.
What is the battery capacity of the POD-143?
The built-in rechargeable battery has a capacity of 250 mAh. This provides about 8 hours of talk or music time at moderate volume levels.
User questions about POD-143 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wireless Headphones in PDF format for free! Find your manual POD-143 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POD-143 by Steren.
USER MANUAL POD-143 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : POD-143
Category : Wireless Headphones