Black Output - Synthesizer Erica Synths - Free user manual and instructions
Find the device manual for free Black Output Erica Synths in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Output Module |
| Brand | Erica Synths |
| Model | Black Output |
| Width | 6 HP |
| Depth | 30 mm (approx.) |
| Power Consumption | +12V: 30 mA, -12V: 20 mA |
| Inputs | 2x 3.5mm mono jacks (L/R) |
| Outputs | 2x 6.35mm TRS jacks (balanced L/R) |
| Headphone Output | 1x 6.35mm TRS jack, with volume control |
| Main Functions | Line-level output, headphone amplification, ground lift switch |
| Front Panel Controls | Headphone volume knob, ground lift switch |
| Construction | Black anodized aluminum front panel, steel case |
| Dimensions (excl. power cable) | 30 x 128 x 40 mm (W x H x D) |
| Weight | 120 g (approx.) |
| Power Requirement | Standard Eurorack +12V and -12V rails |
| Included Accessories | Mounting screws, power ribbon cable |
| Maintenance & Cleaning | Wipe with dry cloth; avoid moisture and solvents |
| Safety | Use only with Eurorack cases; do not reverse power cable |
| Spare Parts & Repairability | Contact Erica Synths for service; user-replaceable fuses |
| General Information | Designed to provide clean, balanced audio output from modular system |
Frequently Asked Questions - Black Output Erica Synths
What is the Erica Synths Black Output?
The Black Output is a Eurorack module that provides balanced stereo line outputs and a headphone amplifier for connecting your modular synth to mixers, audio interfaces, or headphones.
How do I connect the Black Output to my Eurorack case?
Connect the included power ribbon cable to the module and your case's bus board, ensuring correct polarity (red stripe to -12V). Then secure the module with mounting screws.
What are the output jacks on the Black Output?
The module has two 6.35mm TRS balanced jacks for left and right outputs, and one 6.35mm TRS headphone jack with volume control.
Can I use the Black Output with unbalanced gear?
Yes, the balanced outputs can drive unbalanced inputs using a TS cable; the output will work but without the noise rejection benefit of balanced connection.
What is the ground lift switch for?
The ground lift switch disconnects the signal ground from the module's chassis to eliminate ground loop hum in certain setups.
What is the headphone output power?
It can drive headphones with impedances from 32 to 600 ohms; typical output is up to 50 mW per channel.
Does the Black Output require any special configuration?
No, it is a passive module? Actually it draws power; plug it in and it works. Set your modular's individual voice levels before output.
Can I daisy-chain multiple Black Output modules?
There is no daisy-chain feature; each module operates independently. Use one per stereo output path.
What is the width of the Black Output?
It occupies 6 HP (horizontal pitch) in a Eurorack case.
How do I clean the Black Output module?
Power off and disconnect. Use a soft, dry cloth to gently wipe the front panel and jacks. Avoid liquids and abrasive cleaners.
User questions about Black Output Erica Synths
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Black Output - Erica Synths and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Black Output by Erica Synths.
USER MANUAL Black Output Erica Synths
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Erica Synths
Model : Black Output
Category : Synthesizer