ADR 96 - Air conditioner Orbegozo - Free user manual and instructions
Find the device manual for free ADR 96 Orbegozo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Orbegozo |
| Model | ADR 96 |
| Cooling Capacity | 9000 BTU/h |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Cooling) | Approx. 900 W |
| Refrigerant | R290 |
| Airflow | Up to 300 m³/h |
| Noise Level | ≤ 65 dB(A) |
| Dimensions (W x D x H) | 350 x 350 x 700 mm |
| Weight | 25 kg |
| Exhaust Hose Length | 1.5 m |
| Water Tank Capacity | 1.5 L (self-evaporating system) |
| Functions | Cooling, Fan, Dehumidify |
| Timer | 24-hour programmable timer |
| Remote Control | Yes, included |
| Filter Type | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks; drain tank if full |
| Safety Features | Overheat protection, auto restart, child lock |
| Spare Parts Availability | Available from Orbegozo authorized service centers |
| Warranty | 2 years |
Frequently Asked Questions - ADR 96 Orbegozo
How do I install the exhaust hose?
Connect the exhaust hose to the back of the unit and route it outside through a window or sliding door. The hose should be as short and straight as possible for optimal performance. Use the provided window kit to seal the opening.
How often should I clean the air filter?
Clean the washable mesh filter every two weeks to maintain airflow and efficiency. Wash with mild soap and water, dry completely before reinstalling.
Why is water leaking from the unit?
In self-evaporating mode, excess water may leak if the ambient humidity is very high. Check that the unit is level and the drain plug is secure. If leaking persists, use the continuous drain hose (not included) for permanent drainage.
The unit is not cooling as expected. What should I check?
Ensure the exhaust hose is properly vented outside and not blocked. Clean the air filter, close windows and doors, and set the thermostat lower than room temperature. Also, verify that the unit is sized for the room (up to 20 m²).
Can I use an extension cord?
No, do not use an extension cord as it can cause voltage drop and overheating. Plug the air conditioner directly into a properly grounded wall outlet rated for 10A or higher.
How do I use the timer function?
Press the Timer button on the remote or control panel. Use the + or - buttons to set the desired time (1-24 hours). The unit will turn off automatically after the set time. To set a delayed start, press Timer again and set the time before the unit starts.
Why does the unit make a loud noise?
Normal operation includes the sound of the compressor and fan. If noise is excessive, check that the unit is on a flat surface and the air filter is clean. Also, inspect for loose parts or foreign objects inside the unit.
What does error code E1 mean?
Error code E1 indicates a problem with the room temperature sensor. Unplug the unit for 5 minutes and plug it back in. If the error persists, contact Orbegozo customer service for assistance.
How do I change the temperature unit from Celsius to Fahrenheit?
Press and hold the Temp + and - buttons simultaneously for 3 seconds while the unit is in standby mode. The display will toggle between °C and °F.
Where can I find spare parts or accessories?
Spare parts and accessories (such as remote control, hoses, and filters) are available through Orbegozo authorized service centers. Visit the Orbegozo website and use the 'Support' or 'Spare Parts' section with your model number ADR 96.
User questions about ADR 96 Orbegozo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual ADR 96 - Orbegozo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADR 96 by Orbegozo.