GVS C8DCE-12 - Tumble dryer CANDY - Free user manual and instructions
Find the device manual for free GVS C8DCE-12 CANDY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Installation Type | Freestanding |
| Drying System | Condenser |
| Capacity (kg) | 8 kg |
| Energy Efficiency Class | B |
| Annual Energy Consumption (kWh) | 560 kWh |
| Noise Level (dB(A)) | 65 dB(A) |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Weight (kg) | 40 kg |
| Electrical Supply | 220-240 V, 50 Hz |
| Current Rating (A) | 10 A |
| Number of Programs | 12 |
| Drying Programs | Cotton, Synthetics, Delicates, Mix, Wool, Rapid, etc. |
| Anti-Crease Function | Yes, 30 min |
| Start Delay | Yes, up to 24 hours |
| Child Lock | Yes |
| Lint Filter Cleaning | After each cycle |
| Water Container Capacity | 3.5 L |
| Condenser Cleaning | Regularly, every 30 cycles |
| Safety Features | Overheat protection, door lock, child lock |
| Repairability Index | 7.5 / 10 |
Frequently Asked Questions - GVS C8DCE-12 CANDY
How do I clean the lint filter on my Candy GVS C8DCE-12 tumble dryer?
Open the door and pull the lint filter upwards from the door opening. Open the filter and remove lint with your hand or a soft brush. Rinse under running water if needed, then dry thoroughly and reinsert.
What should I do if the dryer doesn't start?
Check that the door is closed properly, the plug is connected, and the circuit breaker is on. Ensure the start button is pressed and the program is selected. If still not starting, the overheat protection may have activated; wait 30 minutes before retrying.
How often should I clean the condenser unit?
Clean the condenser unit every 30 drying cycles or when the Condenser Clean indicator lights up. Remove it from the bottom of the dryer, flush with water, and dry before reinstalling.
Can I dry wool or delicate items in this dryer?
Yes, the dryer has a Wool program (max 1 kg) and a Delicates program for low-temperature drying. Always check the garment label for dryer compatibility.
Why is the drying time longer than expected?
Longer drying times may occur due to a overloaded drum, a clogged lint filter, or a full water container. Also, if the room temperature is low, the heat pump (if applicable) may take longer. Clean the filter and condenser, and reduce load size.
What does the error code E01 mean?
Error code E01 indicates a door lock issue. Check that the door is fully closed and the lock mechanism is not blocked. If the problem persists, contact customer service.
How do I enable child lock?
Press and hold the Child Lock button (usually marked with a key icon) for 3 seconds until the indicator lights up. To deactivate, press and hold again for 3 seconds.
Can I stop the dryer mid-cycle to add clothes?
Depending on the program, you can press Pause/Start to stop the cycle. If the door unlocks (typically after a few minutes), you can open it and add clothes. Not all programs allow this; refer to the manual.
What is the recommended load size for the Cotton program?
For the Cotton program, the maximum load is 8 kg (dry weight). Overloading can cause poor drying results and increased energy consumption. For best results, fill the drum loosely to about half full.
How do I drain the water container if it is full?
Pull out the water container located at the bottom of the dryer. Open the cap and pour the water into a sink. Ensure the cap is replaced securely before sliding the container back in. The dryer will not operate if the container is full.
User questions about GVS C8DCE-12 CANDY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual GVS C8DCE-12 - CANDY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GVS C8DCE-12 by CANDY.