TSC 503G1EB - Heating Thermocool - Free user manual and instructions
Find the device manual for free TSC 503G1EB Thermocool in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fan Heater / Convector |
| Model | TSC 503G1EB |
| Brand | Thermocool |
| Color | Black / White (typical) |
| Dimensions (H x W x D) | Approx. 600 x 200 x 250 mm |
| Weight | Approx. 3.5 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 2000 W (max) |
| Heating Modes | Fan only, Low heat (1000 W), High heat (2000 W) |
| Thermostat Control | Adjustable thermostat |
| Oscillation | Yes, wide-angle oscillation |
| Safety Features | Overheat protection, tip-over switch |
| Noise Level | Approx. 45 dB |
| Cleaning | Wipe with damp cloth; do not immerse |
| Remote Control | Included (battery operated) |
| Timer | 1-8 hour timer |
| Certifications | CE, RoHS |
Frequently Asked Questions - TSC 503G1EB Thermocool
How do I set the timer on my Thermocool TSC 503G1EB heater?
Press the Timer button until the desired hours (1-8) flash on the display. The heater will automatically turn off after the set time.
Why does my heater suddenly stop working?
The heater may have activated its overheat protection. Turn it off, unplug it, and wait 15 minutes for it to cool down. Check for blocked air intakes or filters.
Can I use the heater in a bathroom?
No, this heater is not designed for bathrooms or high-humidity areas. It should be used in dry indoor spaces only.
How do I clean the heater?
Disconnect the heater from the power supply. Use a soft damp cloth to wipe the exterior. Do not use abrasive cleaners or immerse in water. Clean the air inlet grilles with a vacuum brush attachment.
The remote control is not working. What should I do?
Check the batteries in the remote. Replace them if needed. Ensure you are pointing the remote towards the heater's receiver. If still not working, try resetting the heater by unplugging it for 10 seconds.
What is the maximum coverage area for this heater?
The Thermocool TSC 503G1EB is suitable for rooms up to 20 square meters (approximately 215 square feet), depending on insulation and climate.
Can I leave the heater unattended overnight?
It is not recommended to leave the heater unattended for long periods. However, the built-in tip-over switch and overheat protection provide safety. Still, never leave it on while sleeping.
How do I switch between fan and heat modes?
Use the Mode button on the control panel or remote to cycle through: Fan Only, Low Heat (1000W), and High Heat (2000W). The display will show the current mode.
The heater makes a ticking noise when heating up. Is that normal?
Yes, it is normal. The metal expansion and contraction as the heater warms up and cools down can cause ticking sounds. This is not a defect.
Where can I find the user manual or spare parts?
Download the manual for free from notice-facile.com. For spare parts, contact Thermocool customer service or authorized dealers. Keep the model number (TSC 503G1EB) ready.
User questions about TSC 503G1EB Thermocool
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual TSC 503G1EB - Thermocool and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TSC 503G1EB by Thermocool.
USER MANUAL TSC 503G1EB Thermocool
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Thermocool
Model : TSC 503G1EB
Category : Heating