KX-P1150 - Printer PANASONIC - Free user manual and instructions
Find the device manual for free KX-P1150 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dot Matrix Printer |
| Brand | Panasonic |
| Model | KX-P1150 |
| Dimensions (W x D x H) | 431 x 284 x 146 mm |
| Weight | Approximately 4.5 kg |
| Power Supply | AC 100-120V, 50/60 Hz |
| Power Consumption | 40 W (printing), 5 W (standby) |
| Print Technology | 9-pin dot matrix |
| Print Speed | Up to 240 cps (draft), 48 cps (NLQ) |
| Print Resolution | Maximum 240 x 216 dpi |
| Interface | Centronics parallel (IEEE 1284) |
| Paper Handling | Friction feed, push tractor |
| Paper Width | Up to 254 mm (10 inches) |
| Copies | Original + 3 copies (max) |
| Noise Level | Approximately 55 dB(A) |
| MTBF | 6,000 hours (excluding print head) |
| Print Head Life | Approximately 200 million characters |
| Ribbon Life | Approximately 3.5 million characters (black) |
| Operating Temperature | 5°C to 35°C |
| Operating Humidity | 20% to 80% RH (non-condensing) |
| Included Accessories | Ribbon cartridge, AC power cord, manual |
Frequently Asked Questions - KX-P1150 PANASONIC
How do I load paper into the Panasonic KX-P1150?
Open the front cover, adjust the paper guides to the width of your paper, insert the paper until it is gripped by the rollers, and close the cover. Use the paper feed button to advance the paper.
Why is the printer not printing?
Check that the power cord is connected, the printer is turned on, and the online indicator is lit. Verify the cable connection to your computer. If the printer is offline, press the online button.
How do I replace the ribbon cartridge?
Turn off the printer, open the front cover, remove the old ribbon cartridge by lifting it up, insert the new cartridge firmly into place, and ensure the ribbon is not twisted. Close the cover and turn the printer on.
The print quality is faint or uneven. What should I do?
First, ensure the ribbon is not worn out. If it is, replace it. Also, check that the print head is clean. You can clean it by following the self-test procedure: hold the line feed button while turning on the printer.
How do I perform a self-test on the KX-P1150?
Turn off the printer, then hold down the line feed button while turning the printer back on. The printer will print a self-test pattern. Press online to stop the test.
My computer does not detect the printer. What interface does it use?
The KX-P1150 uses a standard Centronics parallel interface. Ensure your computer has a parallel port or use a compatible USB-to-parallel adapter. Install the appropriate driver if needed.
How can I prevent paper jams?
Use paper of the correct size and weight (20-24 lb bond). Fan the paper before loading. Ensure the paper guides are set firmly against the edges. Avoid overfilling the paper tray.
What is the maximum paper width the printer can handle?
The printer can handle paper up to 254 mm (10 inches) wide. For continuous forms, use the optional pull tractor.
How do I set the paper thickness lever?
The paper thickness lever is located near the paper path. Adjust it based on the number of copies: position 1 for single sheets, position 2 for two copies, etc. For envelopes, use position 4.
The printer is making unusual noises. What could be wrong?
Check for paper jams or obstructions. Ensure the ribbon cartridge is correctly installed. If the noise persists, the print head or carriage may need lubrication. Refer to the maintenance section of your manual for guidance.
User questions about KX-P1150 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual KX-P1150 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KX-P1150 by PANASONIC.