HG-DS930 - Smoke detector Hagroy - Free user manual and instructions
Find the device manual for free HG-DS930 Hagroy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Brand | Hagroy |
| Model | HG-DS930 |
| Dimensions | Approx. 4.5 inches (114 mm) diameter, 1.5 inches (38 mm) height |
| Weight | Approx. 150 g (with battery) |
| Power Source | 9V DC battery (included) |
| Battery Life | Approximately 1 year under normal use |
| Detection Technology | Ionization sensor |
| Alarm Volume | 85 dB at 10 feet (3 meters) |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | 5% to 95% relative humidity (non-condensing) |
| Installation | Ceiling or wall mounting with included hardware |
| Test Button | Yes, for functional test |
| Low Battery Indicator | Chirping sound every 30-60 seconds |
| Maintenance | Vacuum dust from vents monthly; replace battery annually |
| Safety Certification | UL 217 listed |
| Spare Parts | Battery (9V) and mounting screws are replaceable |
| Reparability | Non-serviceable; replace entire unit after 10 years |
| Warranty | Limited 5-year warranty |
Frequently Asked Questions - HG-DS930 Hagroy
How do I install the Hagroy HG-DS930 smoke detector?
Choose a location on the ceiling or high on a wall, away from corners and vents. Use the included mounting bracket and screws to attach it. Insert the 9V battery, close the compartment, and press the test button to ensure it works.
What does the red LED flashing mean?
The red LED flashes every 30-60 seconds to indicate that the detector is powered and functioning. If it flashes rapidly during an alarm, it indicates smoke detection.
How often should I test the smoke detector?
Test the detector weekly by pressing and holding the test button until the alarm sounds. Release the button to stop the alarm. This ensures the sensor and battery are working.
What should I do if the alarm goes off accidentally?
First, check for smoke or fire. If it's a false alarm, ventilate the area to clear any smoke or steam. Press the silence/hush button if available, or open windows. Ensure the detector is not near cooking or bathrooms.
How do I change the battery?
Rotate the detector counterclockwise to detach it from the mounting bracket. Open the battery compartment, remove the old 9V battery, and insert a new one. Reattach the unit and test it.
The detector chirps every minute, what does that mean?
A chirping sound (usually every 30-60 seconds) indicates a low battery. Replace the 9V battery immediately. If chirping continues after battery replacement, the unit may need cleaning or replacement.
Can I use this detector in a mobile home?
Yes, the HG-DS930 is suitable for mobile homes. Ensure it is installed according to local regulations and away from high-humidity areas like bathrooms.
How do I clean the smoke detector?
Vacuum the vents gently every month with a soft brush attachment to remove dust and debris. Do not use water or cleaners, as they may damage the sensor.
When should I replace the entire smoke detector?
Replace the detector after 10 years from the date of manufacture (check the date on the unit) or if it fails the test. Also replace it after a severe fire or if it has been exposed to smoke damage.
Is this detector suitable for kitchens?
The HG-DS930 is an ionization detector and may be prone to false alarms from cooking. It is recommended to place it at least 10 feet away from cooking appliances or use a photoelectric detector in kitchens.
User questions about HG-DS930 Hagroy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual HG-DS930 - Hagroy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HG-DS930 by Hagroy.