5G108-BG5 - Unknown Accu-Tech - Free user manual and instructions
Find the device manual for free 5G108-BG5 Accu-Tech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Accu-Tech |
| Model | 5G108-BG5 |
| Product Type | Network Switch |
| Number of Ports | 5 |
| Data Rate | 10/100/1000 Mbps |
| MAC Address Table | 8K entries |
| Switching Capacity | 10 Gbps |
| Dimensions (W x D x H) | 5.5 x 3.5 x 1 in (140 x 89 x 25 mm) |
| Weight | 0.5 lb (227 g) |
| Power Supply | External AC adapter, 5V DC, 1A |
| Power Consumption | 3.5W (max) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Link/Activity per port |
| Mounting | Desktop |
| Fanless Design | Yes |
| Compliant Standards | IEEE 802.3, 802.3u, 802.3ab |
| Warranty | Limited Lifetime |
Frequently Asked Questions - 5G108-BG5 Accu-Tech
How do I set up the Accu-Tech 5G108-BG5 switch?
Connect the included power adapter to the switch and plug it into an outlet. Use Ethernet cables to connect your devices (computers, routers, etc.) to any of the five ports. No configuration is required for basic operation.
Is the switch plug-and-play?
Yes, the switch is designed for plug-and-play operation. It automatically detects and configures the speed and duplex mode for each connected device.
What are the LED indicators on the front?
There is a power LED that lights up when the switch is powered on. Each port has its own link/activity LED: solid green indicates a link, blinking indicates activity.
Can I mount the switch on a wall?
The switch is designed for desktop use only. It does not include wall-mounting hardware or keyhole slots.
What is the maximum cable length supported?
The switch supports Ethernet cable lengths up to 100 meters (328 feet) per the IEEE 802.3 standard.
Does the switch support VLANs or QoS?
No, this is an unmanaged switch. It does not support VLANs, QoS, or any advanced configuration. It simply forwards traffic based on MAC addresses.
How do I reset the switch?
There is no reset button. To reset the switch, simply power it off and on again.
What power adapter does the switch use?
The switch uses an external AC adapter with 5V DC output and 1A current. The connector is a standard barrel jack (5.5 mm outer, 2.1 mm inner, center positive).
Is the switch compatible with Cat5e and Cat6 cables?
Yes, the switch is compatible with Cat5e, Cat6, and Cat6a cables for Gigabit performance.
What should I do if the switch overheats?
Ensure the switch has adequate ventilation. Do not place it on soft surfaces or block the ventilation slots. If overheating persists, reduce the ambient temperature or contact support.
User questions about 5G108-BG5 Accu-Tech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual 5G108-BG5 - Accu-Tech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5G108-BG5 by Accu-Tech.
USER MANUAL 5G108-BG5 Accu-Tech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Accu-Tech
Model : 5G108-BG5
Category : Unknown