NI-100 - Taximeter Nitax - Free user manual and instructions
Find the device manual for free NI-100 Nitax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Taximeter |
| Brand | Nitax |
| Model | NI-100 |
| Dimensions (approx.) | 150 x 80 x 30 mm |
| Weight (approx.) | 200 g |
| Power Supply | 12 V DC from vehicle battery |
| Display | Backlit LCD, 8 digits |
| Fare Calculation | Time and distance based, multiple tariff rates |
| Data Storage | Non-volatile memory for trip logs and settings |
| Printer Interface | Built-in thermal printer (receipt width 58 mm) |
| Connectivity | RS232/RS485 serial port for external devices |
| Day/Night Mode | Automatic switching with user configurable rates |
| Calibration | Via front panel or PC software (password protected) |
| Operating Temperature | -10°C to +60°C |
| Housing Material | ABS plastic, impact resistant |
| Mounting | Dashboard or windshield bracket (included) |
| Included Accessories | Mounting kit, cable harness, user manual |
| Certification | CE, MID (Measuring Instruments Directive) |
| Warranty | 2 years |
Frequently Asked Questions - NI-100 Nitax
How do I install the Nitax NI-100 taximeter?
Connect the red wire to +12V ignition, black to ground, and use the provided bracket to mount the device securely on your dashboard.
How do I calibrate the taximeter?
Calibration requires a password (default 1234). Press SETUP then enter password, follow on-screen prompts for tire size, pulses per km, and fare rates.
Can I print receipts?
Yes, the NI-100 has a built-in thermal printer. Press the PRINT button during or after a trip to issue a receipt.
How do I change the paper roll?
Open the printer cover, remove the old roll, insert a new 58mm thermal paper with the paper facing down, and close the cover.
What do I do if the display shows 'Error 5'?
Error 5 indicates a printer jam. Open the printer cover, remove any jammed paper, and ensure the paper is loaded correctly.
How do I set the time and date?
Go to SETUP > CLOCK and use the arrow keys to adjust the time/date. Press ENTER to save.
Is the taximeter legal for use in all countries?
The NI-100 is MID certified for Europe. Check local regulations for other regions as calibration requirements may vary.
How do I switch between day and night rates?
The taximeter automatically switches based on a pre-set time (e.g., 6:00 AM day, 10:00 PM night). You can adjust these times in the TARIFF menu.
Can I connect the taximeter to a GPS?
Yes, the serial port (RS232) can be used to connect external devices such as GPS receivers for automatic distance calibration.
How do I clean the taximeter?
Use a soft dry cloth to wipe the exterior. Do not use liquids or sprays. For the printer head, use an alcohol swab when cold.
User questions about NI-100 Nitax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Taximeter in PDF format for free! Find your manual NI-100 - Nitax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NI-100 by Nitax.
USER MANUAL NI-100 Nitax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Nitax
Model : NI-100
Category : Taximeter