PHS60C10 - Air conditioner Philco - Free user manual and instructions
Find the device manual for free PHS60C10 Philco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Model | PHS60C10 |
| Brand | Philco |
| Cooling Capacity | 6000 BTU/h (1.76 kW) |
| Heating Capacity | 6000 BTU/h (1.76 kW) |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Unit Dimensions (W x H x D) | 60 cm x 25 cm x 30 cm |
| Outdoor Unit Dimensions (W x H x D) | 70 cm x 50 cm x 25 cm |
| Indoor Unit Weight | 8 kg |
| Outdoor Unit Weight | 25 kg |
| Refrigerant | R32 |
| Functions | Cooling, Heating, Dehumidifying, Fan, Sleep Mode, Timer |
| Air Filter | Washable mesh filter |
| Remote Control | Included |
| Noise Level (Indoor) | 40 dB (Low) / 60 dB (High) |
| Energy Efficiency Ratio (EER) | 3.5 |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Overload protection, auto restart |
| Spare Parts Available | Filter, remote control |
Frequently Asked Questions - PHS60C10 Philco
How do I clean the air filter?
Remove the front panel and take out the filter. Wash it with lukewarm water and mild detergent, then let it dry completely before reinstalling. Clean the filter every 2 weeks.
How do I set the timer?
Press the Timer button on the remote. Use the + and - buttons to set the desired time. Press Timer again to confirm. The unit will turn on/off after the set time.
What do the error codes mean?
Common error codes: E1 (sensor failure), E2 (freeze protection), E3 (overload). Refer to the manual for a full list. If an error persists, contact service.
The remote control is not working. What should I do?
Replace the batteries with new AAA alkaline batteries. Ensure the remote is pointed at the indoor unit receiver. If still not working, check for obstructions or contact support.
Can I use an extension cord?
No, do not use an extension cord or adapter. Plug the air conditioner directly into a dedicated wall outlet with the correct voltage.
How often should I service the air conditioner?
Professional servicing is recommended once a year to check refrigerant levels, clean coils, and ensure efficient operation.
Does this unit have a heating function?
Yes, the PHS60C10 has a heat pump function for heating. Press the Mode button to select Heat mode. It can operate in cold weather down to -7°C.
How do I switch between Celsius and Fahrenheit?
On the remote control, press and hold the + and - buttons simultaneously for 3 seconds to toggle between °C and °F.
What is the recommended room size?
This unit is suitable for rooms up to 20 m² (215 sq ft) with standard ceiling height.
Can I install the unit myself?
Installation requires technical knowledge. It is recommended to hire a professional installer to ensure proper mounting, refrigerant connections, and electrical safety.
User questions about PHS60C10 Philco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual PHS60C10 - Philco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PHS60C10 by Philco.
USER MANUAL PHS60C10 Philco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Philco
Model : PHS60C10
Category : Air conditioner