HT33K8126 - Washing machine ELECTROLUX - Free user manual and instructions
Find the device manual for free HT33K8126 ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Electrolux |
| Model | HT33K8126 |
| Capacity | 8 kg |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Weight | 72 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Class | A+++ |
| Spin Speed | 1400 rpm |
| Noise Level (Wash/Spin) | 56 dB / 76 dB |
| Main Functions | Delayed Start, Quick Wash, Eco Wash, Stain Treatment, Pre-wash |
| Safety Features | Child Lock, Overflow Protection, Unbalanced Load Control |
| Cleaning and Maintenance | Drain Pump Filter, Detergent Drawer, Door Seal |
| Spare Parts and Repairability | Hinge, Door Seal, Belt, Pump, Motor (Available) |
| Water Consumption | 45 L per cycle |
| Annual Energy Consumption | 160 kWh |
| Dimensions (unpacked) | 85 x 60 x 60 cm |
Frequently Asked Questions - HT33K8126 ELECTROLUX
How do I install the washing machine?
Remove all packaging, connect water inlet hose to a tap with 3/4 inch thread, place drain hose in a standpipe or sink, level the machine using adjustable feet, and plug into a grounded outlet.
What should I do if the drum does not rotate?
Check if the machine is overloaded, ensure the child lock is not activated, and verify that the belt is intact. If the problem persists, contact Electrolux support.
How do I clean the filter?
Turn off the machine, unplug it, open the filter cap at the bottom, place a container to catch water, turn the filter counterclockwise, remove lint, and clean it. Reinstall and tighten.
The machine displays an error code E10. What does it mean?
E10 indicates a water inlet issue. Check that the water tap is fully open, the inlet hose is not kinked, and the filter in the inlet valve is not clogged. If the error persists, contact a technician.
How can I reduce noise during spinning?
Ensure the machine is level on the floor, remove any objects left in the drum, and avoid overloading. Check if the transport bolts are removed if newly installed.
What is the maximum load for a cotton cycle?
The maximum load for cotton cycles is 8 kg. Exceeding this may reduce washing performance and cause imbalance.
How do I use the delayed start function?
Press the 'Delayed Start' button repeatedly to set the desired delay (e.g., 3, 6, 9 hours). The machine will start automatically so that the cycle finishes at the set time.
What detergent should I use?
Use a HE (high efficiency) detergent suitable for automatic washers. For best results, follow the detergent manufacturer's dosage and avoid overdosing.
Why does the door not open after the cycle?
The door lock is engaged for safety. Wait 2 minutes after the cycle ends for the lock to release. If it still does not open, check if the water level is too high (drain problem) or the machine is still heating.
How do I transport the machine?
Drain any remaining water, secure the drum with transport bolts (saved from installation), tape the door and detergent drawer, and keep the machine upright during transport.
User questions about HT33K8126 ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual HT33K8126 - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HT33K8126 by ELECTROLUX.
USER MANUAL HT33K8126 ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : HT33K8126
Category : Washing machine