F10B8TDW - Washing machine LG - Free user manual and instructions
Find the device manual for free F10B8TDW LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Front-loading washing machine |
| Capacity | 10 kg |
| Spin Speed | 800 rpm |
| Energy Efficiency Class | A+++ |
| Annual Energy Consumption | 170 kWh |
| Water Consumption per Cycle | 50 L |
| Noise Level (Wash) | 56 dB(A) |
| Noise Level (Spin) | 78 dB(A) |
| Dimensions (H x W x D) | 850 x 600 x 560 mm |
| Weight | 70 kg |
| Power Supply | 220-240 V, 50 Hz |
| Display | LED display |
| Number of Programs | 14 |
| Drum Material | Stainless steel |
| Door Opening Angle | 180° |
| Child Lock | Yes |
| Delay Start | Yes (up to 19 hours) |
| Remaining Time Display | Yes |
| Self-Clean | Yes |
| Smart Diagnosis | Yes |
Frequently Asked Questions - F10B8TDW LG
How do I install the washing machine?
Ensure the machine is on a level, stable surface. Remove all transport bolts before use. Connect the water inlet hose to a cold water tap (3/4 inch thread) and the drain hose to a standpipe or sink. Plug into a grounded outlet.
What detergent should I use?
Use a high-efficiency (HE) detergent for front-loading machines. Refer to the detergent drawer labels: main wash, pre-wash, and fabric softener. Do not oversud.
How do I clean the lint filter?
The lint filter is located at the bottom front of the machine. Open the cover, pull out the filter, rinse under running water, and replace. Clean it after every 10 cycles.
Why is my machine not draining?
Check the drain hose for kinks or blockages. Clean the drain pump filter (bottom front). Ensure the standpipe is not clogged. If issue persists, run the Drain program.
How do I use the Delay Start feature?
Press the Delay Start button repeatedly to set delay time (1-19 hours). Close the door and press Start/Pause. The machine will start at the set time.
What does the Child Lock do?
Activate Child Lock to prevent button presses during a cycle. Press and hold the two buttons indicated in the manual for 3 seconds. To deactivate, repeat.
How do I run a cleaning cycle?
Use the Self Clean or Drum Clean program. Add a washing machine cleaner or a small amount of bleach to the main wash compartment. Run the cycle empty.
What do error codes mean?
Common codes: IE (water supply issue), UE (unbalanced load), OE (drain issue), FE (overflow). Refer to the manual's error code table for detailed solutions.
Can I install it under a counter?
Yes, the machine is designed for built-in installation. Minimum clearance of 20 mm on sides and top is required. Ensure the worktop is removed if needed.
How do I prevent mold in the door seal?
After each use, leave the door ajar to allow air circulation. Wipe the door gasket with a dry cloth monthly. Run a hot self-clean cycle periodically.
User questions about F10B8TDW LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual F10B8TDW - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F10B8TDW by LG.
USER MANUAL F10B8TDW LG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LG
Model : F10B8TDW
Category : Washing machine