REVO

REXN600-2 - Security Camera REVO - Free user manual and instructions

Find the device manual for free REXN600-2 REVO in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice REVO REXN600-2 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Security Camera
Brand REVO
Model REXN600-2
Dimensions (H x W x D) 7.0 x 7.0 x 15.0 cm
Weight 500 g
Power Supply 12V DC, 1A
Image Sensor 1/2.8" CMOS
Resolution 1920 x 1080 (Full HD)
Night Vision IR LEDs up to 30m
Lens 3.6mm fixed
Field of View 80° horizontal
Weatherproof Rating IP66
Operating Temperature -20°C to 50°C
Motion Detection Yes
Audio Built-in microphone
Connectivity RJ45 Ethernet, BNC
Storage NVR or DVR compatible
Mounting Wall or ceiling bracket included
Maintenance Clean lens with soft cloth
Safety Use only supplied power adapter
Spare Parts Contact REVO support
Warranty 1 year limited

Frequently Asked Questions - REXN600-2 REVO

How do I reset the REVO REXN600-2 security camera to factory defaults?
Locate the reset button on the camera (usually a small pinhole). Press and hold it for 10 seconds using a paperclip while the camera is powered on. The camera will reboot and restore factory settings.
What is the maximum distance for night vision on the REXN600-2?
The REXN600-2 has IR LEDs that provide night vision up to 30 meters (100 feet) in complete darkness.
Can I use this camera outdoors under rain or snow?
Yes, the camera has an IP66 weatherproof rating, meaning it is protected against dust and strong water jets. It can be used outdoors in rain, snow, and dust.
How do I connect the REXN600-2 to my DVR or NVR?
Use a BNC cable to connect the camera's video output to the DVR/NVR's input. For power, use the included 12V DC adapter or connect to a compatible power source. If using an NVR, ensure the camera is set to the correct IP address.
What is the resolution of the REVO REXN600-2 camera?
The camera captures video at Full HD 1080p (1920 x 1080 pixels) resolution.
Does the REXN600-2 support audio recording?
Yes, it has a built-in microphone that can record audio along with video. Ensure your DVR/NVR supports audio input.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or lens cleaner. Gently wipe the lens in a circular motion. Avoid touching the lens with fingers.
What is the field of view of the REXN600-2?
The camera has a fixed 3.6mm lens providing an 80° horizontal field of view, suitable for monitoring corridors, doorways, and small rooms.
The camera image is blurry. What should I check?
First, clean the lens. Then adjust the focus ring on the camera (if available). Ensure the camera is not too close to the subject and lighting is adequate. If using a DVR, check the video settings.
Where can I find replacement parts or accessories for the REXN600-2?
Contact REVO support or visit the official REVO website for spare parts such as mounting brackets, power adapters, and cables. Use only REVO-approved accessories to maintain warranty.

User questions about REXN600-2 REVO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Security Camera in PDF format for free! Find your manual REXN600-2 - REVO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REXN600-2 by REVO.

USER MANUAL REXN600-2 REVO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : REVO

Model : REXN600-2

Category : Security Camera