Froggy's Fog

Poseidon A6 - Effects machine Froggy's Fog - Free user manual and instructions

Find the device manual for free Poseidon A6 Froggy's Fog in PDF.

📄 13 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Froggy's Fog Poseidon A6 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Fog Machine
Model Poseidon A6
Brand Froggy's Fog
Dimensions (H x W x D) Approximately 12 x 6 x 8 inches
Weight Approximately 5 lbs
Power Supply AC 120V / 60Hz (North America) or AC 230V / 50Hz (EU) via IEC power cord
Power Consumption Approximately 300-500 watts
Heating Time Approximately 2-3 minutes
Fluid Capacity 0.5 liters (removable tank)
Fog Output Up to 2,000 cubic feet per minute
Remote Control Wired remote with 10 ft cable (on/off)
Functions Continuous fog output; optional timer via remote (not included)
Fluid Type Water-based fog fluid only (Froggy's Fog recommended)
Maintenance Run distilled water through after each use; clean pump periodically
Safety Features Thermal cutoff; auto shut-off when empty; low fluid warning (light)
Spare Parts Replacement pump, heating element, and fluid tank available
Repair Information Contact Froggy's Fog customer support; user-replaceable parts
Warranty 1-year limited warranty against defects
Certifications CE, RoHS compliant
Recommended Use Indoor events, haunted houses, Halloween decorations, stage effects

Frequently Asked Questions - Poseidon A6 Froggy's Fog

What type of fluid should I use in the Poseidon A6?
Use only water-based fog fluid, such as Froggy's Fog brand. Using oil-based fluids will damage the machine.
How do I clean the fog machine?
Run a mixture of distilled water through the machine after each use. Periodically flush with a cleaning solution recommended by the manufacturer.
How long does it take to heat up?
The heating time is approximately 2-3 minutes. The indicator light will change when ready.
Can I use this machine outdoors?
It is designed for indoor use only. Outdoor use may cause wind to dissipate the fog and reduce effectiveness.
What is the maximum fog output?
The Poseidon A6 can produce up to 2,000 cubic feet of fog per minute, suitable for medium-sized rooms.
How do I replace the fluid tank?
Pull out the removable tank from the top, refill, and push back in until it clicks. Do not overfill.
Is the machine safe to use around people?
Yes, using water-based fog fluid is non-toxic and safe. Ensure the area is well-ventilated and avoid direct inhalation.
What does the low fluid warning indicate?
A red light will flash when the fluid level is low. Refill the tank to prevent pump damage.
Can I use a timer or DMX control?
This model comes with a wired remote for on/off. It does not support DMX or advanced timers without additional accessories.
Where can I find spare parts?
Contact Froggy's Fog customer service or visit their website for replacement pumps, heating elements, and tanks.

User questions about Poseidon A6 Froggy's Fog

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Effects machine in PDF format for free! Find your manual Poseidon A6 - Froggy's Fog and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Poseidon A6 by Froggy's Fog.

USER MANUAL Poseidon A6 Froggy's Fog

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Froggy's Fog

Model : Poseidon A6

Category : Effects machine