DP-FIB-II - AV Extender Apantac - Free user manual and instructions
Find the device manual for free DP-FIB-II Apantac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DisplayPort Fiber Optic Extender |
| Model | DP-FIB-II |
| Brand | Apantac |
| Video Interface | DisplayPort 1.2 |
| Max Resolution | 3840x2160 @ 60Hz (4K UHD) |
| Max Transmission Distance | Up to 300 meters (984 ft) over OM3 multi-mode fiber |
| Fiber Connector Type | Dual LC duplex |
| Audio Support | Embedded audio pass-through |
| EDID Management | Built-in EDID emulation |
| Power Supply | External DC 5V/2A adapter |
| Power Consumption | < 5W (each unit) |
| Dimensions (each unit) | 100 x 65 x 25 mm (3.9 x 2.6 x 1.0 in) |
| Weight (each unit) | 200 g (7.0 oz) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
| ESD Protection | ±8kV air, ±4kV contact |
| Package Contents | Transmitter and receiver units, power adapters, user manual |
| Certifications | CE, FCC, RoHS |
| Warranty | 2 years limited |
Frequently Asked Questions - DP-FIB-II Apantac
What is the maximum resolution supported by the DP-FIB-II?
The DP-FIB-II supports resolutions up to 3840x2160 @ 60Hz (4K UHD).
How far can I extend the DisplayPort signal?
With multi-mode fiber (OM3), the extender can transmit signals up to 300 meters (984 feet).
Does it require external power?
Yes, each unit (transmitter and receiver) requires a 5V/2A DC power adapter (included).
What type of fiber optic cable is needed?
Use a dual LC duplex multi-mode fiber cable (OM3 or OM4 recommended).
Does it support audio?
Yes, embedded audio in the DisplayPort signal is passed through transparently.
How do I set up the extender?
Connect the transmitter to your source (PC) via DisplayPort, attach a fiber cable between transmitter and receiver, then connect the receiver to your display. Power on both units.
Can I use it with a laptop that has a mini DisplayPort?
Yes, you can use a mini DisplayPort to DisplayPort adapter (not included) to connect to the transmitter.
What does the LED status indicate?
A solid green LED indicates normal operation. A blinking or off LED may indicate no signal or fiber connection issue.
Does it support HDCP?
Yes, the extender is HDCP 1.4 compliant for protected content.
How should I clean the fiber connectors?
Use a lint-free fiber cleaning swab or a specialized fiber optic cleaning pen. Avoid touching the end faces.
User questions about DP-FIB-II Apantac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your AV Extender in PDF format for free! Find your manual DP-FIB-II - Apantac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DP-FIB-II by Apantac.
USER MANUAL DP-FIB-II Apantac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Apantac
Model : DP-FIB-II
Category : AV Extender