2708 - Household Fan Lasko - Free user manual and instructions
Find the device manual for free 2708 Lasko in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Oscillating Household Fan |
| Brand | Lasko |
| Model | 2708 |
| Dimensions (Height) | Approximately 45 inches (114 cm) |
| Dimensions (Width) | Approximately 16 inches (41 cm) |
| Weight | Approximately 9 lbs (4 kg) |
| Power Source | 120V AC, 60Hz |
| Wattage | 60 Watts |
| Fan Speed Settings | 3 Speeds (Low, Medium, High) |
| Oscillation | Yes, Wide-Area Oscillation |
| Tilt Adjustment | Manual Tilt |
| Blade Diameter | 16 inches (41 cm) |
| Grill Material | Metal with Powder Coat Finish |
| Base Type | Sturdy Plastic Base |
| Control Type | Manual Rotary Knob |
| Safety Features | Overheat Protection, Fused Plug |
| Cleaning Instructions | Unplug and wipe with damp cloth; do not immerse |
| Maintenance | Lubricate motor annually with light oil |
| Replacement Parts | Blades, Grills, Motor available from Lasko |
| Repairability | User-replaceable fuse; motor service by professional |
| Certifications | ETL Listed |
| Warranty | 1 Year Limited Warranty |
Frequently Asked Questions - 2708 Lasko
How do I clean my Lasko 2708 fan?
Unplug the fan before cleaning. Use a soft damp cloth to wipe the grills and base. Do not use abrasive cleaners or immerse the fan in water. For deeper cleaning, you can remove the front grill by unscrewing the knob at the bottom.
Why is my fan not oscillating?
Ensure the oscillation knob on top of the motor housing is pushed down. If it still doesn't oscillate, the oscillation gear may be stripped. Contact Lasko customer service for replacement parts.
Can I use an extension cord with this fan?
Yes, but use a 14 AWG or heavier extension cord and keep it as short as possible. Do not plug the fan into a power strip or outlet that is overloaded.
What should I do if the fan stops running during use?
The fan may have overheated and activated its thermal cut-off. Unplug the fan, let it cool for at least 30 minutes, and then plug it back in. If it still doesn't run, check the plug fuse (if equipped) or contact support.
How do I replace the fuse in the plug?
Unplug the fan. Locate the fuse compartment on the plug. Use a small screwdriver to pry it open. Replace with a 5A 125V fuse (same type). Close the compartment and test the fan.
Is the Lasko 2708 quiet?
It is relatively quiet on low speed but produces moderate noise on high speed suitable for background white noise. It should not disturb sleep for most users.
Can I adjust the tilt of the fan?
Yes, the fan head can be tilted manually by pushing or pulling the head while the fan is off. Do not force it beyond its range.
Where is the model number located?
The model number is printed on a label on the back of the fan base and also on the original packaging.
Does the fan have a remote control?
No, the Lasko 2708 is manual control only. It uses a rotary knob on the back of the motor housing for speed and oscillation.
What is the warranty period?
Lasko offers a 1-Year Limited Warranty against defects in materials and workmanship. Keep your receipt for warranty claims.
User questions about 2708 Lasko
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Household Fan in PDF format for free! Find your manual 2708 - Lasko and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2708 by Lasko.
USER MANUAL 2708 Lasko
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lasko
Model : 2708
Category : Household Fan