Supermicro

X10SLE-DF - Motherboard Supermicro - Free user manual and instructions

Find the device manual for free X10SLE-DF Supermicro in PDF.

📄 95 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Supermicro X10SLE-DF - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Motherboard
Brand Supermicro
Model X10SLE-DF
Form Factor SSI EEB (12" x 13")
Socket LGA 2011-3
Chipset Intel C612
Processor Support Intel Xeon E5-2600 v3/v4
Memory Type DDR4 ECC RDIMM/LRDIMM
Memory Slots 8 DIMM slots
Maximum Memory 512 GB
Expansion Slots 2 x PCIe 3.0 x16, 2 x PCIe 3.0 x8
Storage Interfaces 10 x SATA3 (6 Gbps), 2 x M.2 NVMe
Network 2 x Intel i210 GbE LAN
USB Ports 2 x USB 3.0 (rear), 4 x USB 2.0 (header)
Video Integrated BMC with VGA (Aspeed AST2400)
Power Connectors 24-pin ATX, 8-pin EPS12V
Dimensions 305 mm x 330 mm (12" x 13")
Weight Approximately 1.8 kg (4 lbs)
Operating Temperature 0°C to 50°C
Security Features TPM 2.0 header, Secure Boot, BIOS password
Repairability Replaceable CMOS battery, CPU socket, memory modules

Frequently Asked Questions - X10SLE-DF Supermicro

What processor does the Supermicro X10SLE-DF support?
The Supermicro X10SLE-DF supports Intel Xeon E5-2600 v3 and v4 processors in the LGA 2011-3 socket.
How much memory can the X10SLE-DF accommodate?
The motherboard has 8 DIMM slots and supports up to 512 GB of DDR4 ECC RDIMM or LRDIMM memory.
Does the X10SLE-DF have built-in graphics?
Yes, it has an integrated BMC with VGA output (Aspeed AST2400) for server management and display.
What type of storage interfaces are available?
The board provides 10 SATA3 (6 Gbps) ports and 2 M.2 NVMe slots for high-speed storage.
How many network ports does the X10SLE-DF have?
It features dual Intel i210 GbE LAN controllers for reliable networking.
What is the form factor of this motherboard?
The Supermicro X10SLE-DF uses the SSI EEB form factor, measuring 12 inches by 13 inches (305 mm x 330 mm).
Can I use non-ECC memory with the X10SLE-DF?
No, the motherboard requires DDR4 ECC registered memory; standard non-ECC DIMMs are not supported.
How do I update the BIOS on the X10SLE-DF?
You can update the BIOS via the IPMI web interface or by booting from a USB flash drive with the update file. Always follow the instructions in the manual.
Does the motherboard support RAID?
Yes, the Intel C612 chipset supports RAID 0, 1, 10, and 5 for SATA drives.
What is the purpose of the BMC on the X10SLE-DF?
The Baseboard Management Controller (BMC) allows remote management, monitoring, and control of the server, including power on/off and sensor reading.

User questions about X10SLE-DF Supermicro

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Motherboard in PDF format for free! Find your manual X10SLE-DF - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X10SLE-DF by Supermicro.

USER MANUAL X10SLE-DF Supermicro

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Supermicro

Model : X10SLE-DF

Category : Motherboard