PIONEER

2MT280-MB - Uncategorized PIONEER - Free user manual and instructions

Find the device manual for free 2MT280-MB PIONEER in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice PIONEER 2MT280-MB - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeAudio Receiver / Tuner
BrandPioneer
Model2MT280-MB
Dimensions (W x H x D)280 x 100 x 250 mm
Weight1.8 kg
Power SupplyAC 100-240V, 50/60 Hz
Power Consumption30 W (standby <0.5 W)
Audio InputsAUX, USB, Bluetooth, FM/AM antenna
Audio OutputsSpeaker terminals (4-16 ohm), headphone jack
Supported Audio FormatsMP3, WMA, AAC, FLAC
FM Tuner Range87.5 - 108 MHz
AM Tuner Range530 - 1710 kHz
Bluetooth Version4.2
Max Output Power2 x 50 W (RMS) at 4 ohm
Frequency Response20 Hz - 20 kHz
Signal-to-Noise Ratio90 dB
MaterialBrushed aluminum front panel, ABS chassis
DisplayLCD with white backlight
Remote ControlIncluded (CR2025 battery)
Cleaning & MaintenanceWipe with a soft, dry cloth; do not use solvents.
SafetyDo not expose to water or moisture. Unplug during storms.
Spare Parts & RepairabilityContact Pioneer service. Repairability score: 7/10.

Frequently Asked Questions - 2MT280-MB PIONEER

How do I connect my smartphone via Bluetooth?
Press the Bluetooth button on the front panel or remote. Enable Bluetooth on your phone and select Pioneer 2MT280-MB from the list. Pairing is automatic after the first connection.
Can I play music from a USB drive?
Yes. Insert a USB drive (FAT32 format) into the USB port. The device will automatically detect and play supported audio files like MP3, WMA, and FLAC.
How do I set the clock?
Press and hold the Clock button on the remote. Use the volume knob or arrow keys to set hours and minutes. Press Enter to confirm.
What is the maximum power output?
The amplifier delivers 2 x 50 W RMS at 4 ohms, or 2 x 30 W RMS at 8 ohms. Ensure speaker impedance is 4-16 ohms.
How do I reset the device to factory settings?
While the unit is on, press and hold the Power button for 5 seconds until Factory Reset appears on the display. Confirm with Enter. All settings will be cleared.
Does it have a headphone jack?
Yes, a 3.5mm headphone jack is located on the front panel. Inserting headphones automatically mutes the speakers.
Can I control the device with a universal remote?
Yes. The device learns IR codes. Press and hold Learn on the 2MT280-MB, then point your universal remote and press the desired button. The code will be stored.
Why is there no sound from the speakers?
Check that the speakers are properly connected and impedance matches (4-16 ohms). Ensure the source is selected and volume is turned up. Verify that Mute is not active (press Mute button).
How do I clean the device?
Disconnect the power. Use a soft, dry microfiber cloth to wipe the exterior. Do not use liquid cleaners or sprays, as they may damage the electronics.
Is there a warranty?
Pioneer offers a 2-year limited warranty on the 2MT280-MB. Retain your purchase receipt. For warranty claims, contact your local Pioneer service center.

User questions about 2MT280-MB PIONEER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual 2MT280-MB - PIONEER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2MT280-MB by PIONEER.

USER MANUAL 2MT280-MB PIONEER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PIONEER

Model : 2MT280-MB

Category : Uncategorized