MD-177 - Uncategorized Microchip - Free user manual and instructions
Find the device manual for free MD-177 Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Development Board for Microchip PIC Microcontrollers |
| Dimensions | 120 mm x 70 mm x 15 mm |
| Weight | 45 g |
| Power Supply | 5V DC via USB (500 mA max) |
| Microcontroller | PIC18F series (40-pin DIP socket included) |
| Clock Speed | Up to 64 MHz |
| Memory | 128 KB Flash, 4 KB SRAM, 1 KB EEPROM |
| Digital I/O Pins | 33 pins (5V tolerant) |
| Analog Inputs | 13 channels, 12-bit ADC |
| Communication Interfaces | USB 2.0 (Full Speed), UART, SPI, I2C |
| On-Board Peripherals | Power LED, User LED, Reset Button, ICSP Header |
| Programming Environment | MPLAB X IDE, MPLAB XC8 Compiler |
| Supported Languages | C and Assembly |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -20°C to 85°C |
| Humidity | 0% to 90% (non-condensing) |
| Safety Certification | CE, FCC |
| Maintenance | Wipe with a dry, soft cloth; do not use liquids or solvents |
| Repairability | No user-serviceable parts; contact Microchip support for repair |
| Spare Parts Availability | Replacement microcontrollers and accessories available through Microchip distributors |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - MD-177 Microchip
What software do I need to program the MD-177?
You need MPLAB X IDE and MPLAB XC8 Compiler (both free from Microchip) to write and compile code for the MD-177.
How do I connect the MD-177 to my computer?
Connect the MD-177 to your computer using a USB 2.0 cable (Micro-B or Type-A depending on board version). The board will appear as a serial device.
What is the default firmware on the MD-177?
The MD-177 comes preloaded with a blink demo that cycles the user LED to verify basic functionality.
Can I use the MD-177 with Arduino?
No, the MD-177 is designed for PIC microcontrollers and is not compatible with the Arduino ecosystem. Use MPLAB X IDE instead.
How do I reset the MD-177?
Press the reset button (labeled RST) on the board. This will restart the microcontroller without erasing the program.
What is the maximum current I can draw from the 5V pin?
The on-board voltage regulator can supply up to 500 mA when powered via USB. Avoid exceeding this limit to prevent damage.
Why is my MD-177 not detected by the computer?
Check the USB cable and ensure the board is powered (green LED on). Install the USB driver from Microchip's website if needed.
Can I attach external sensors to the MD-177?
Yes, the board has 33 digital I/O pins and 13 analog inputs (0-5V) for connecting sensors and actuators. Use breadboard-friendly headers.
How do I update the firmware on the MD-177?
The MD-177 does not have a built-in bootloader for firmware updates. Use an external programmer (like PICkit 4) via the ICSP header.
Is the MD-177 suitable for battery-powered projects?
Yes, but note that USB power is required for programming. For standalone operation, use the 5V input pin with a regulated battery supply.
User questions about MD-177 Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MD-177 - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD-177 by Microchip.
USER MANUAL MD-177 Microchip
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Microchip
Model : MD-177
Category : Uncategorized