SB-ROCKET-1TB - Storage Sabrent - Free user manual and instructions
Find the device manual for free SB-ROCKET-1TB Sabrent in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Internal Solid State Drive (SSD) |
| Model | Sabrent SB-ROCKET-1TB |
| Capacity | 1 TB (1000 GB) |
| Form Factor | M.2 2280 |
| Interface | PCIe Gen3 x4, NVMe 1.3 |
| Sequential Read Speed | Up to 3400 MB/s |
| Sequential Write Speed | Up to 3000 MB/s |
| Dimensions (L x W x H) | 80 mm x 22 mm x 2.1 mm |
| Weight | 7 g |
| Power Consumption | Active: 6.5 W; Idle: 0.3 W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Shock Resistance | 1500 G / 0.5 ms |
| MTBF | 1,500,000 hours |
| Endurance (TBW) | 600 TBW |
| Key Features | NVMe support, low latency, TRIM, S.M.A.R.T. |
| Maintenance & Cleaning | No user maintenance required. Keep contacts clean. Avoid liquids. |
| Safety | Operate within specified temperature. Do not disassemble. ESD sensitive. |
| Spare Parts & Repairability | No user-replaceable parts. Contact Sabrent for warranty service. |
| General Information | Compatible with M.2 slots supporting PCIe NVMe. Backward compatible with SATA M.2 slots? No. |
Frequently Asked Questions - SB-ROCKET-1TB Sabrent
How do I install the Sabrent SB-ROCKET-1TB SSD?
Insert the M.2 SSD at a 30-degree angle into the M.2 slot on your motherboard, then press down and secure with the screw. Ensure the system is powered off and grounded.
Is the SB-ROCKET-1TB compatible with PS5?
Yes, the Sabrent Rocket 1TB NVMe SSD is compatible with PS5 as it meets the required PCIe Gen4 speeds, but note this model is Gen3, so performance may be lower. For optimal PS5 performance, consider a Gen4 model.
What is the warranty for this SSD?
The Sabrent SB-ROCKET-1TB typically comes with a limited 5-year warranty or until the TBW (600 TBW) is reached, whichever occurs first.
What should I do if my computer does not detect the SSD?
Check that the SSD is fully seated in the M.2 slot. Ensure your BIOS is set to NVMe mode (not SATA). Try a different M.2 slot. Update your motherboard's BIOS. If still not detected, test the SSD in another system.
Can I use the Sabrent Rocket 1TB as a boot drive?
Yes, it is ideal for boot drives. Install your operating system directly onto the SSD for fast boot times and application loading.
What is the difference between SATA and NVMe SSDs?
NVMe SSDs use the PCIe interface, offering much higher sequential read/write speeds (up to 3400 MB/s) compared to SATA SSDs (up to 560 MB/s). The SB-ROCKET-1TB is an NVMe SSD.
Does this SSD support TRIM?
Yes, the Sabrent SB-ROCKET-1TB supports TRIM commands under Windows, macOS, and Linux to maintain performance over time.
What is the power consumption of the SB-ROCKET-1TB?
Active power consumption is approximately 6.5 W, and idle power is about 0.3 W, making it energy-efficient for laptops and desktops.
Is the SSD compatible with MacBooks?
It works with MacBooks that have a user-replaceable M.2 slot (e.g., 2015 models) but not with soldered drives. Check your Mac model’s compatibility.
How can I check the health of my Sabrent Rocket SSD?
Use CrystalDiskInfo or Sabrent's own SSD dashboard software to monitor drive health, temperature, total writes, and S.M.A.R.T. status.
User questions about SB-ROCKET-1TB Sabrent
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Storage in PDF format for free! Find your manual SB-ROCKET-1TB - Sabrent and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB-ROCKET-1TB by Sabrent.
USER MANUAL SB-ROCKET-1TB Sabrent
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sabrent
Model : SB-ROCKET-1TB
Category : Storage