HB-INTR - Uncategorized Sabrent - Free user manual and instructions
Find the device manual for free HB-INTR Sabrent in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2.5" SATA Hard Drive Enclosure |
| Interface | USB 3.0 (5 Gbps) |
| Supported Drives | 2.5-inch SATA HDD/SSD (up to 9.5mm height) |
| Dimensions | 12.0 x 7.0 x 1.5 cm (4.7 x 2.8 x 0.6 in) |
| Weight | 80 g (2.8 oz) |
| Material | Aluminum body with brushed finish |
| Operating Systems | Windows, macOS, Linux (no driver needed) |
| Power Supply | Bus-powered via USB (no external adapter) |
| LED Indicator | Blue LED for power and activity |
| Compatibility | SATA I, SATA II, SATA III (backward compatible) |
| Hot Swap | Yes (plug and play) |
| UASP Support | Yes (faster data transfer with UASP-enabled hosts) |
| Included Accessories | USB 3.0 cable, user manual, screwdriver |
| Maintenance | Keep dry, clean with soft cloth |
| Safety | Overcurrent and short circuit protection |
| Repairability | Easy disassembly; drive replacement without tools |
| General Information | Sabrent HB-INTR is a portable external enclosure designed for 2.5-inch SATA drives |
Frequently Asked Questions - HB-INTR Sabrent
What type of drives does the Sabrent HB-INTR support?
It supports 2.5-inch SATA hard drives and SSDs with a height of up to 9.5 mm.
Does the HB-INTR require an external power supply?
No, it is bus-powered via the USB port. For most drives, a single USB 3.0 port provides sufficient power.
What is the maximum data transfer speed?
Up to 5 Gbps with USB 3.0. Actual speed depends on the drive and host controller. UASP support further improves performance.
Is the Sabrent HB-INTR compatible with USB 2.0?
Yes, it is backward compatible with USB 2.0, but speeds will be limited to 480 Mbps.
Do I need to install drivers?
No, it is plug-and-play on Windows, macOS, and Linux. Drivers are built into the operating systems.
Can I use this enclosure with a 3.5-inch desktop hard drive?
No, it is specifically designed for 2.5-inch drives only. 3.5-inch drives require a larger adapter with external power.
How do I install the hard drive into the enclosure?
Slide the drive into the enclosure, align the SATA connector, and secure with the included screws (if any) or snap-fit lid. Refer to the manual for details.
What should I do if the drive is not recognized?
Check the USB connection and try a different port. Ensure the drive is properly seated. If using a new drive, initialize and format it using Disk Management (Windows) or Disk Utility (Mac).
Does the HB-INTR support SATA III (6 Gbps) drives?
Yes, it is compatible with SATA I, II, and III drives. However, the interface speed is limited by USB 3.0 to about 5 Gbps.
Is there an LED indicator to show activity?
Yes, a blue LED indicates power and blinks during data transfer.
User questions about HB-INTR Sabrent
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HB-INTR - Sabrent and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HB-INTR by Sabrent.
USER MANUAL HB-INTR Sabrent
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sabrent
Model : HB-INTR
Category : Uncategorized