S4101-24ET2GF-360-C - Uncategorized Dahua Technology - Free user manual and instructions
Find the device manual for free S4101-24ET2GF-360-C Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed PoE+ Switch |
| Number of Ports | 24 x 10/100/1000 Mbps PoE+ + 2 x SFP+ 10 Gbps |
| PoE Budget | 360W total, up to 30W per port |
| Dimensions (W x D x H) | 440 mm x 250 mm x 44 mm (1U rack-mountable) |
| Weight | 4.5 kg |
| Power Supply | 100-240 VAC, 50/60 Hz; internal power supply |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| MAC Address Table | 32K entries |
| VLAN Support | 802.1Q VLAN, up to 4K VLANs |
| Management Features | CLI, Web GUI, SNMP v1/v2c/v3, RMON, LLDP |
| Quality of Service (QoS) | 8 priority queues, strict priority and weighted round robin |
| Security Features | 802.1X port-based authentication, ACL, DHCP snooping, IP Source Guard |
| Cooling | 2 built-in fans, intelligent fan speed control |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5% to 95% non-condensing |
| Safety Certifications | CE, FCC, UL |
| Spare Parts & Repairability | No user-serviceable parts; contact Dahua support for repairs |
| Maintenance | Clean exterior with a dry cloth; ensure ventilation grills are free of dust |
| General Information | Rack mount kit included; supports stacking via SFP+ for up to 8 units |
Frequently Asked Questions - S4101-24ET2GF-360-C Dahua Technology
What is the PoE budget of the S4101-24ET2GF-360-C?
The switch provides a total PoE budget of 360 watts, with each port capable of delivering up to 30W (PoE+).
Does this switch support VLANs?
Yes, it supports 802.1Q VLAN with up to 4K VLAN entries and port-based VLAN configuration.
How do I access the management interface?
You can manage the switch via a web browser using the default IP address 192.168.1.110 (user/password: admin/admin), or via SSH/Telnet to the CLI.
What is the default username and password?
The default login credentials are admin for both username and password. It is recommended to change them on first login.
How do I perform a firmware upgrade?
Download the latest firmware from Dahua's website, then use the web interface under Maintenance > Upgrade to upload the .bin file.
Can I stack multiple units?
Yes, this model supports physical stacking via the SFP+ uplink ports (port 25 and 26) to form a single logical unit of up to 8 switches.
What do the LED indicators mean?
Each port has two LEDs: left indicates link/activity (green for 1000M, yellow for 10/100M), right shows PoE status (green when powered). System LEDs show power and stacking status.
Is the switch rack-mountable?
Yes, it comes with a rack mount kit and is designed to fit a standard 19-inch rack, occupying 1U of space.
What is the power consumption?
Without PoE load, the unit consumes approximately 30W. With full PoE load, the total consumption can reach up to 400W, including the PoE budget.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the system LED blinks, then release. The switch will reboot with factory settings.
User questions about S4101-24ET2GF-360-C Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual S4101-24ET2GF-360-C - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S4101-24ET2GF-360-C by Dahua Technology.
USER MANUAL S4101-24ET2GF-360-C Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : S4101-24ET2GF-360-C
Category : Uncategorized