WV-S8531N - Security Camera i-PRO - Free user manual and instructions
Find the device manual for free WV-S8531N i-PRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Model | WV-S8531N |
| Brand | i-PRO |
| Resolution | 4K (3840 x 2160) at 30 fps |
| Image Sensor | 1/2.8-inch CMOS |
| Lens Type | Varifocal, 2.8–12 mm |
| Night Vision | Infrared LED, up to 50 m |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | 12.5 W (max) |
| Dimensions (W x H x D) | 120 x 80 x 80 mm |
| Weight | Approx. 1.1 kg (2.4 lb) |
| Ingress Protection | IP66 |
| Operating Temperature | -30°C to 50°C (-22°F to 122°F) |
| Video Compression | H.265, H.264, MJPEG |
| Intelligent Features | Motion detection, tampering alarm, line crossing detection |
| Storage | microSD slot (up to 256 GB), NAS, Cloud |
| Network Interface | 10/100 Base-T (RJ-45) |
| Maintenance & Cleaning | Wipe outer surface with a dry, soft cloth. Do not use harsh chemicals. |
| Safety Precautions | Install in compliance with local electrical codes. Use only supplied or compatible power source. |
| Spare Parts & Repairability | Contact i-PRO service center for replacement parts. No user-serviceable parts inside. |
| General Information | Designed for indoor/outdoor use. Mounting bracket included. |
Frequently Asked Questions - WV-S8531N i-PRO
How do I connect the WV-S8531N to my network?
Connect the camera to your network switch using a PoE injector or PoE switch. Use a standard Ethernet cable. Assign an IP address via DHCP or manual setup using the i-PRO Configuration Tool.
What is the maximum resolution of the WV-S8531N?
The camera supports up to 4K resolution (3840 x 2160) at 30 frames per second.
Does the camera support night vision?
Yes, it has infrared LEDs with a range of up to 50 meters (164 feet) in complete darkness.
How do I set up motion detection?
Access the camera's web interface, navigate to Event Settings > Motion Detection. Configure detection areas and sensitivity. You can enable email alerts or recording triggers.
Can I use a microSD card for local recording?
Yes, the camera has a microSD slot supporting cards up to 256 GB. Insert the card into the slot located on the side, and enable recording in the settings.
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for about 5 seconds using a small tool. The camera will reboot with default settings.
Is the camera weatherproof?
Yes, the WV-S8531N has an IP66 rating, making it suitable for outdoor use in rain, snow, and dust.
What power options are available?
The camera supports PoE (Power over Ethernet) IEEE 802.3af, or can be powered by a 12V DC adapter (not included). PoE is recommended for simpler installation.
How do I tilt and pan the camera?
The camera lens is fixed; however, the mounting bracket allows manual adjustment of tilt, pan, and rotation for optimal viewing angle.
What software can I use to manage the camera?
You can use i-PRO's Configuration Tool for setup, and any ONVIF-compliant VMS software for management. The camera also integrates with i-PRO's cloud services.
User questions about WV-S8531N i-PRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual WV-S8531N - i-PRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WV-S8531N by i-PRO.
USER MANUAL WV-S8531N i-PRO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : i-PRO
Model : WV-S8531N
Category : Security Camera