FOR-3000 - Uncategorized Jonard Tools - Free user manual and instructions
Find the device manual for free FOR-3000 Jonard Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fiber Optic Fusion Splicer |
| Brand | Jonard Tools |
| Model | FOR-3000 |
| Dimensions | 30 cm x 20 cm x 15 cm |
| Weight | 4.5 kg |
| Power Supply | AC 110-240V, 50/60Hz; DC 12V battery input |
| Battery Type | Lithium-ion rechargeable, 10.8V, 6800mAh |
| Splice Modes | SM, MM, DS, NZDS |
| Fiber Types | Single-mode, Multimode, Dispersion-shifted |
| Cladding Diameter | 125 μm |
| Coating Diameter | 250-900 μm |
| Fiber Cleave Length | 8-20 mm |
| Average Splice Loss | < 0.02 dB (SM), < 0.01 dB (MM) |
| Splice Time | Typical 9 seconds |
| Heating Time | Typical 30 seconds |
| Arc Power | Adjustable, up to 20W |
| Electrode Life | Approx. 3000 splices |
| Alignment Method | Active core alignment via motorized stages |
| Display | 5-inch color LCD touchscreen |
| Storage Capacity | 10,000 splice records |
| Operating Temperature | -10°C to 50°C |
| Maintenance | Clean V-grooves and optics daily; replace electrodes as needed |
| Safety Features | Laser safety class 1; automatic shutdown; heat shield |
| Included Accessories | AC adapter, battery pack, fiber holders, carrying case |
Frequently Asked Questions - FOR-3000 Jonard Tools
What is the Jonard FOR-3000?
The FOR-3000 is a fiber optic fusion splicer designed for splicing single-mode and multimode fibers with low loss and high speed.
How do I clean the V-grooves?
Use a lint-free swab moistened with isopropyl alcohol. Gently rub the V-grooves to remove dirt. Allow to dry before use.
What battery does the FOR-3000 use?
It uses a lithium-ion rechargeable battery (10.8V, 6800mAh) that supports up to 200 splice/heating cycles per charge.
How often should I replace the electrodes?
Electrodes typically last for 3000 splices. Replace them when arc appearance degrades or splice loss increases.
Can the FOR-3000 splice different fiber types?
Yes, it supports single-mode, multimode, dispersion-shifted, and non-zero dispersion-shifted fibers.
What is the typical splice loss?
The average splice loss is < 0.02 dB for single-mode and < 0.01 dB for multimode fibers.
Does it have a built-in oven for protection sleeves?
Yes, it features an integrated heating oven that can shrink sleeves in about 30 seconds.
How do I update the firmware?
Download the latest firmware from the Jonard Tools website, transfer it to a USB drive, and follow the on-screen update instructions.
What warranty does the FOR-3000 come with?
Jonard Tools offers a one-year warranty covering defects in materials and workmanship.
Can I use the splicer with a generator?
Yes, as long as the generator provides stable AC 110-240V output with a clean sine wave to avoid damage.
User questions about FOR-3000 Jonard Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FOR-3000 - Jonard Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FOR-3000 by Jonard Tools.
USER MANUAL FOR-3000 Jonard Tools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jonard Tools
Model : FOR-3000
Category : Uncategorized