TP-752T - AV Extender Kramer - Free user manual and instructions
Find the device manual for free TP-752T Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Extender (Transmitter) |
| Model | TP-752T |
| Brand | Kramer |
| Dimensions (W x D x H) | 12.0 cm x 7.5 cm x 2.5 cm |
| Weight | 0.3 kg |
| Power Supply | 12V DC, 1A |
| Input Interface | HDMI, IR, RS-232 |
| Output Interface | RJ-45 (twisted pair) |
| Max Resolution | 4K@60Hz (4:4:4) |
| Transmission Distance | Up to 100 m over CAT6 |
| Supported Protocol | HDBaseT |
| HDCP Support | HDCP 2.2 |
| Power over Cable | Yes (PoC) |
| Enclosure Material | Metal |
| LED Indicators | Power, Signal, Link |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Included Accessories | Power adapter, mounting brackets, quick start guide |
| Maintenance | Clean with a dry, soft cloth |
| Safety | Use only the supplied power adapter |
| Spare Parts & Repairability | Contact Kramer support for genuine parts |
| General Information | Designed for professional AV extension over long distances |
Frequently Asked Questions - TP-752T Kramer
What is the maximum transmission distance of the Kramer TP-752T?
The Kramer TP-752T can transmit HDMI, IR, and RS-232 signals up to 100 meters over a single CAT6 cable using HDBaseT technology.
Does the TP-752T support 4K resolution?
Yes, it supports 4K@60Hz (4:4:4) resolution, as well as all standard HD resolutions.
Can I extend IR signals with the TP-752T?
Yes, the TP-752T includes an IR input for bi-directional IR extension, allowing remote control from the display location.
Is the TP-752T compatible with HDCP?
Yes, it supports HDCP 2.2 and HDCP 1.4 for protected content playback.
What type of cable should I use?
For best performance, use CAT6 or higher shielded twisted pair cable. CAT5e may work but distances may be reduced.
Does the TP-752T require external power at both ends?
No, Power over Cable (PoC) allows the transmitter to power the receiver via the same twisted pair cable if the receiver also supports PoC. Otherwise, each unit needs its own power.
How do I connect RS-232 devices?
Connect your RS-232 controller to the terminal block on the transmitter; the signal is extended to the receiver's terminal block. Use a 3-wire connection (Tx, Rx, GND).
What do the LED indicators mean?
Power LED lights when powered; Signal LED indicates active HDMI input; Link LED shows a valid HDBaseT connection.
Can I mount the TP-752T on a wall?
Yes, the unit includes mounting brackets for secure wall or rack mounting.
How do I clean and maintain the TP-752T?
Use a dry, soft cloth to clean the exterior. Do not use liquids or abrasive cleaners. Ensure proper ventilation during operation.
User questions about TP-752T Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your AV Extender in PDF format for free! Find your manual TP-752T - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-752T by Kramer.
USER MANUAL TP-752T Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : TP-752T
Category : AV Extender