Studio S36II PM - Loudspeaker JBL - Free user manual and instructions
Find the device manual for free Studio S36II PM JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | JBL |
| Model | Studio S36II PM |
| Dimensions (H x W x D) | 16.5 in x 9.8 in x 11.2 in (419 mm x 249 mm x 285 mm) |
| Weight | 18.5 lbs (8.4 kg) each |
| Power Handling (RMS) | 100 Watts |
| Peak Power Handling | 200 Watts |
| Frequency Response | 45 Hz – 22 kHz (-6 dB) |
| Impedance | 8 Ohms |
| Sensitivity | 88 dB (2.83V @ 1m) |
| Crossover Frequency | 2.5 kHz |
| Driver Configuration | 2-way: 6.5 inch (165 mm) woofer, 1 inch (25 mm) dome tweeter |
| Recommended Amplifier Power | 20 – 150 Watts per channel |
| Enclosure Type | Bass-reflex (rear ported) |
| Finish | Black wood grain vinyl |
| Grille | Removable black cloth |
| Input Type | Spring clips (bi-wire compatible) |
| Warranty | 5 years (parts and labor) |
| Included Accessories | User manual, warranty card |
Frequently Asked Questions - Studio S36II PM JBL
How should I position the JBL Studio S36II PM speakers for best sound?
Place the speakers at ear level when seated, at least 6-12 inches from the back wall to allow the rear port to breathe. Angle them slightly towards the listening position for optimal imaging.
What amplifier power is recommended for these speakers?
JBL recommends an amplifier with 20 to 150 watts per channel. Using an amplifier with higher clean power than the speaker's rating can improve dynamics without damage, but avoid clipping.
Can I use these speakers for home theater?
Yes, the Studio S36II PM works well as front left/right or surround speakers in a home theater system. Pair with a center channel and subwoofer for a full experience.
How do I clean the speaker grille and cabinet?
For the cabinet, use a soft dry cloth. For the grille, gently vacuum with a brush attachment or wipe with a slightly damp cloth. Avoid using any solvents or abrasive cleaners.
What is the impedance of the Studio S36II PM?
The nominal impedance is 8 ohms, making them compatible with most home audio receivers and amplifiers.
Are these speakers magnetically shielded?
No, they are not magnetically shielded. Keep them at least 12 inches away from CRTs or other sensitive magnetic devices.
Can I bi-wire these speakers?
Yes, the binding posts are designed for bi-wiring or bi-amping. Remove the jumper plates between the HF and LF terminals to enable bi-wiring.
What type of speaker wire should I use?
Use 14-16 gauge stranded speaker wire. For runs longer than 50 feet, use 12 gauge wire to minimize resistance.
Why is there no sound coming from one speaker?
Check the speaker wire connections at both the speaker and amplifier terminals. Ensure the wire is stripped properly and making good contact. Also verify that the amplifier channel is not faulty.
Where can I find the user manual for the Studio S36II PM?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email.
User questions about Studio S36II PM JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Studio S36II PM - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Studio S36II PM by JBL.
USER MANUAL Studio S36II PM JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : Studio S36II PM
Category : Loudspeaker