WL16 - Water pump Global Water - Free user manual and instructions
Find the device manual for free WL16 Global Water in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Water Pump |
| Model | WL16 |
| Brand | Global Water |
| Power Source | AC 220-240V, 50Hz |
| Power Consumption | 1500 W (approx.) |
| Max Flow Rate | 250 L/min (approx.) |
| Max Head | 15 m (approx.) |
| Connection Size | 1.5" (38 mm) outlet |
| Material | Stainless Steel and Cast Iron |
| Cable Length | 10 m |
| Protection Class | IP68 |
| Max Liquid Temperature | 35 °C |
| Dimensions (L x W x H) | 30 x 25 x 40 cm |
| Weight | 12 kg (approx.) |
| Features | Thermal overload protection, corrosion-resistant |
| Maintenance | Clean inlet filter regularly; check seals |
| Safety | Use only with GFCI; do not run dry |
| Spare Parts | Impeller, seals, capacitor available |
| Warranty | 2 years |
Frequently Asked Questions - WL16 Global Water
How do I prime the WL16 water pump?
The WL16 is a submersible pump and does not require priming. Ensure it is fully submerged in water before operation.
What is the maximum operating depth?
The maximum submersion depth is 5 meters below the water surface.
Can the pump run dry?
No, running dry can damage the pump. Always ensure adequate water supply and use a float switch if available.
How do I clean the pump?
Disconnect power before cleaning. Remove debris from the inlet filter and rinse with clean water. Do not use harsh chemicals.
What should I do if the pump stops working?
Check the power supply, circuit breaker, and thermal overload reset. If the pump is hot, allow it to cool. If still not working, inspect the impeller for blockages.
Is the pump suitable for seawater?
No, the WL16 is designed for fresh water only. Saltwater will cause corrosion and void the warranty.
Can I use an extension cord?
Yes, but use a heavy-duty cord rated for the pump's wattage. Keep the cord length < 30 m to avoid voltage drop.
How do I install the pump?
Submerge pump in water, connect discharge hose to the outlet, and plug into a GFCI-protected outlet. Ensure strainer is clear.
What is the noise level?
The pump operates at approximately 65 dB, similar to a normal conversation.
How do I store the pump?
After use, drain water, clean and dry the pump. Store in a dry, frost-free place.
User questions about WL16 Global Water
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual WL16 - Global Water and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WL16 by Global Water.
USER MANUAL WL16 Global Water
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Global Water
Model : WL16
Category : Water pump