INFINITY

Reference 6422CFP - Car speaker INFINITY - Free user manual and instructions

Find the device manual for free Reference 6422CFP INFINITY in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice INFINITY Reference 6422CFP - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Car Speaker (Coaxial 2-Way)
Brand Infinity
Model Reference 6422CFP
Speaker Size 6.5 inches (165 mm)
Design 2-way coaxial with Plus One® cone technology
Impedance 2 ohms
Power Handling (RMS) 60 Watts
Power Handling (Peak) 180 Watts
Frequency Response 45 Hz – 21 kHz
Sensitivity 92 dB (1W/1m)
Mounting Depth 2.5 inches (64 mm)
Outer Diameter 6.9 inches (175 mm)
Weight per Speaker 2.2 lbs (1 kg)
Input Power Source 12V DC from car electrical system
Main Functions Reproduce audio with high fidelity; improved bass response via Plus One® cone
Maintenance & Cleaning Wipe gently with a soft, dry cloth. Do not use abrasive cleaners.
Safety Precautions Disconnect car battery negative terminal before installation to avoid short circuits.
Spare Parts & Repairability Use only manufacturer-approved parts. Contact Infinity support for service.
General Information Designed for car audio systems; compatible with most vehicles. Includes mounting hardware and grilles.

Frequently Asked Questions - Reference 6422CFP INFINITY

What is the size of the Infinity Reference 6422CFP speaker?
It is a 6.5-inch (165 mm) coaxial speaker, commonly fitting standard car speaker openings.
What is the power handling of this speaker?
RMS power handling is 60 watts per speaker, with a peak of 180 watts. Ensure your amplifier can deliver at least 60W RMS per channel at 2 ohms.
What impedance does the 6422CFP have?
The impedance is 2 ohms, which allows it to draw more power from compatible amplifiers compared to 4-ohm speakers.
Can I install these speakers in my car?
Yes, provided your vehicle has 6.5-inch speaker openings and sufficient mounting depth (at least 2.5 inches). Check clearance behind the door panel.
Do I need an external amplifier?
While they can run on head unit power, an external amplifier is recommended to fully utilize their 60W RMS and achieve optimum sound quality.
What is the frequency response?
The frequency response is 45 Hz to 21 kHz, covering deep bass to crisp highs. For extended bass, consider adding a subwoofer.
How do I clean these speakers?
Gently wipe the cone and grille with a soft, dry cloth. Avoid using liquids or harsh chemicals as they may damage the speaker materials.
Are these speakers waterproof?
No, they are not waterproof. Avoid exposure to moisture. Use protective baffles if installing in areas prone to water ingress.
What is the Plus One® cone technology?
Infinity's Plus One® cone increases the cone area for higher sensitivity and deeper bass compared to standard cones of the same size.
Can I use these speakers with a factory radio?
Yes, but factory radios typically output lower power (10-20W). Upgrading to an aftermarket amplifier will significantly improve performance.

User questions about Reference 6422CFP INFINITY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car speaker in PDF format for free! Find your manual Reference 6422CFP - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference 6422CFP by INFINITY.

USER MANUAL Reference 6422CFP INFINITY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : INFINITY

Model : Reference 6422CFP

Category : Car speaker