ARC SUB - Subwoofer JBL - Free user manual and instructions
Find the device manual for free ARC SUB JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | JBL |
| Model | ARC SUB |
| Dimensions (W x H x D) | Approx. 400 x 300 x 400 mm |
| Weight | Approx. 10 kg |
| Power Output | 200 W RMS |
| Frequency Response | 30 Hz – 150 Hz |
| Driver Size | 10 inch (254 mm) |
| Enclosure Type | Bass-reflex with rear port |
| Connectivity | Wireless (2.4 GHz) and wired line-level input |
| Wireless Range | Up to 10 m (30 ft) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 200 W (max), <0.5 W (standby) |
| Controls | Volume, crossover frequency, phase switch |
| Auto Standby | Yes, after ~15 minutes of inactivity |
| Compatible Systems | JBL ARC series soundbars and other wireless transmitters |
| Maintenance & Cleaning | Wipe with dry cloth; do not use liquid cleaners |
| Safety Features | Short-circuit protection, overheat protection |
| Spare Parts & Repairability | Contact JBL service; replaceable driver and amplifier module |
| Package Contents | Subwoofer, power cord, wireless transmitter (if sold separately), user manual |
| Warranty | 2 years (varies by region) |
Frequently Asked Questions - ARC SUB JBL
How do I pair the JBL ARC SUB with my soundbar?
Ensure the subwoofer is powered on. Press the PAIR button on the back of the subwoofer and the PAIR button on the soundbar (or wireless transmitter) within 5 seconds. The LED will blink and turn solid when paired.
What should I do if the subwoofer does not produce sound?
Check that the subwoofer is powered on and the volume is turned up. Verify the wireless connection is established. Ensure the soundbar is set to output bass to the subwoofer. If using wired connection, check the cable.
Can I use the JBL ARC SUB with a non-JBL soundbar?
The ARC SUB is designed for use with JBL ARC series soundbars via a dedicated wireless connection. It may work with other devices if using the wired line-level input, but compatibility is not guaranteed.
How do I clean the subwoofer?
Unplug the subwoofer. Wipe the exterior with a soft, dry cloth. Do not use any liquid cleaners or abrasive materials. Vacuum the port grille gently if dust accumulates.
What is the optimal placement for the subwoofer?
Place the subwoofer on a solid, level floor. Avoid corners to reduce boominess. Keep at least 10 cm (4 inches) of clearance from walls and the rear port. Experiment with location for best bass response.
Does the subwoofer have automatic standby?
Yes, the JBL ARC SUB enters standby mode after approximately 15 minutes of no audio signal to save power. It automatically wakes when a signal is detected.
What are the dimensions and weight of the subwoofer?
The subwoofer measures approximately 400 x 300 x 400 mm (WxHxD) and weighs about 10 kg. Always ensure your shelf or floor can support the weight.
How do I adjust the bass level?
Use the VOLUME knob on the back of the subwoofer. You can also adjust bass settings on the connected soundbar if available.
What is the crossover frequency setting for?
The crossover control sets the upper frequency limit for the subwoofer. Typically set it to match your main speakers (e.g., 80-120 Hz). Higher settings send more bass to the subwoofer.
Where can I download the user manual?
The user manual is available for free download on our website notice-facile.com. Search for 'JBL ARC SUB' and click the download button.
User questions about ARC SUB JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual ARC SUB - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARC SUB by JBL.