TA-25Mini v.2 - Amplifier Taga Harmony - Free user manual and instructions
Find the device manual for free TA-25Mini v.2 Taga Harmony in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Integrated Stereo Amplifier |
| Brand | Taga Harmony |
| Model | TA-25Mini v.2 |
| Dimensions (W x D x H) | 250 mm x 200 mm x 80 mm |
| Weight | Approx. 3 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 80 W (max) |
| Output Power | 2 x 25 W (8 Ω RMS) |
| Frequency Response | 20 Hz - 20 kHz ± 0.5 dB |
| Input Impedance | 47 kΩ |
| Signal-to-Noise Ratio | > 90 dB |
| Total Harmonic Distortion | < 0.05% |
| Bluetooth Version | 5.0 (aptX HD) |
| Inputs | 2 × RCA, 1 × Optical, 1 × Coaxial, 1 × USB (type B) |
| Outputs | Speaker terminals (banana plugs), 1 × Subwoofer Pre-out |
| Speaker Impedance | 4-8 Ω |
| Remote Control | Included (IR) |
| Maintenance and Cleaning | Wipe with a dry, soft cloth. Avoid solvents. |
| Safety Features | Overload, short-circuit, and thermal protection |
| Spare Parts and Repairability | Contact Taga Harmony support for service |
| General Information | Designed for home audio; compact and versatile |
Frequently Asked Questions - TA-25Mini v.2 Taga Harmony
How do I connect my turntable to the TA-25Mini v.2?
The TA-25Mini v.2 does not have a built-in phono preamp. You need an external phono preamp connected to one of the RCA inputs.
Can I use the amplifier with 4-ohm speakers?
Yes, the amplifier supports speaker impedance from 4 to 8 ohms. Ensure proper ventilation when using 4-ohm speakers at high volume.
How do I pair a Bluetooth device?
Press the Bluetooth button on the remote or front panel to enter pairing mode. Select 'Taga TA-25Mini' from your device's Bluetooth list. The connection is confirmed by a blue LED.
What should I do if the amplifier does not power on?
Check the power cord connection, ensure the power switch is on, and verify the mains outlet is working. If it still does not power on, contact customer support.
Is there a subwoofer output?
Yes, there is a dedicated subwoofer pre-out (RCA) on the rear panel. Connect your powered subwoofer using a standard RCA cable.
How do I clean the amplifier?
Unplug the amplifier and wipe the exterior with a soft, dry cloth. Do not use any liquids or abrasive cleaners. Ensure vents are free of dust.
Can I use the optical input for TV audio?
Yes, connect your TV's optical output to the amplifier's optical input. Make sure to select the correct input source (e.g., 'Optical') on the amplifier.
What is the maximum power output?
The amplifier delivers 2 x 25 watts RMS into 8 ohms, and up to 2 x 40 watts into 4 ohms. Peak power may be higher.
Does the remote control require batteries?
Yes, the remote uses two AAA batteries (not included). Open the battery compartment on the back to insert them.
How do I reset the amplifier to factory settings?
Press and hold the 'Source' button on the front panel for 5 seconds until the display flashes. The amplifier will restart with default settings.
User questions about TA-25Mini v.2 Taga Harmony
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Amplifier in PDF format for free! Find your manual TA-25Mini v.2 - Taga Harmony and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TA-25Mini v.2 by Taga Harmony.
USER MANUAL TA-25Mini v.2 Taga Harmony
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taga Harmony
Model : TA-25Mini v.2
Category : Amplifier