Hartland - Ceiling fan HUNTER - Free user manual and instructions
Find the device manual for free Hartland HUNTER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Fan |
| Brand | Hunter |
| Model | Hartland |
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Blade Material | Medium Density Fiberboard (MDF) with engineered wood |
| Motor Type | Reversible, 3-speed |
| Power Supply | 120 V AC, 60 Hz |
| Control Method | Remote control and pull chain |
| Light Kit | Compatible, not included |
| Fan Direction | Reversible (summer/winter) |
| Dimensions (HxW) | 16 x 52 inches |
| Weight | 15.5 lbs |
| Finish | Brushed Nickel |
| Mounting Type | Standard, flush mount optional |
| Certifications | UL listed, safety tested |
| Warranty | Limited Lifetime Motor Warranty |
| Cleaning | Wipe with a soft, dry cloth; avoid water or harsh cleaners |
| Replacement Parts | Blades, light kits, remote controls available |
| Room Size Recommendation | Up to 400 sq. ft. (12x12 room) |
Frequently Asked Questions - Hartland HUNTER
How do I install the Hunter Hartland ceiling fan?
Installation requires mounting the fan to a standard ceiling outlet box rated for fan support. Follow the included manual: assemble blades, attach motor, connect wiring (black to black, white to white, green to ground), and install canopy. Use the remote control or pull chain to operate.
How do I reverse the fan direction?
Locate the reverse switch on the motor housing (usually a slide switch). For summer, set to counterclockwise (downward airflow). For winter, set to clockwise (upward airflow to circulate warm air).
Can I add a light kit to the Hartland fan?
Yes, the fan is light kit compatible. Purchase a Hunter light kit and install it by removing the bottom cap, connecting the wires (blue for light), and attaching the kit with screws.
How do I clean my ceiling fan?
Turn off the fan. Use a soft, dry cloth or duster to wipe blades and motor housing. For stubborn dirt, mildly dampen cloth with water (no chemicals) and dry immediately. Avoid wetting the motor.
What should I do if the remote control stops working?
First, replace the remote battery. If still not working, ensure the fan is receiving power and the remote dip switches match the receiver. Try pairing again: turn off power for 10 seconds, then restore and press the remote's pair button within 30 seconds.
Why is my fan making noise?
Common causes: loose screws on blades or mounting bracket, unbalanced blades, or improper installation. Tighten all screws. Use a balancing kit if needed. Ensure the fan is securely mounted to a reinforced ceiling box.
Can I use the fan on a sloped ceiling?
Yes, the Hartland can be installed on sloped ceilings with a standard downrod. Use a longer downrod for steeper angles (up to 20 degrees without issue). A special angled ceiling mount may be required for greater slopes.
What is the warranty coverage?
Hunter offers a Limited Lifetime Motor Warranty for the motor. Other components (blades, remote, etc.) are covered for one year from purchase. Proof of purchase is required.
How can I balance the fan blades?
Use the included balancing kit: attach the clip to a blade, turn on the fan, and slide the clip until wobble stops. Then stick the adhesive weight at that spot. Repeat if necessary.
What is the maximum airflow?
At high speed, the Hartland delivers approximately 5,000 CFM (cubic feet per minute) of airflow, sufficient for rooms up to 400 sq. ft.
User questions about Hartland HUNTER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ceiling fan in PDF format for free! Find your manual Hartland - HUNTER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hartland by HUNTER.