PTH094K35AXXX - Air conditioner AMANA - Free user manual and instructions
Find the device manual for free PTH094K35AXXX AMANA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Packaged Terminal Air Conditioner (PTAC) |
| Model | PTH094K35AXXX |
| Brand | Amana |
| Cooling Capacity | 9,000 BTU/h |
| Heating Capacity | 3,400 BTU/h (electric heat) |
| Power Supply | 115 V, 60 Hz, 1 phase |
| Amperage | 7.5 A (cooling) |
| Refrigerant | R-410A |
| Air Flow (High) | 250 CFM |
| Dimensions (W x H x D) | 26 x 16.75 x 21.25 inches |
| Weight | 85 lbs |
| Controls | Digital thermostat with remote control ready |
| Filter | Washable foam filter |
| Installation | Through-wall sleeve (sold separately) |
| Warranty | 1 year parts and labor, 5 years on sealed system |
| Energy Efficiency Ratio (EER) | 9.5 |
| Safety Certifications | UL listed, ETL certified |
Frequently Asked Questions - PTH094K35AXXX AMANA
How do I clean the filter on my Amana PTH094K35AXXX?
Turn off the unit and remove the front grille. Slide out the foam filter. Rinse with warm water, let it dry completely, then reinstall. Clean monthly for optimal performance.
Why is my PTAC unit not cooling properly?
Check if the filter is dirty. Ensure the thermostat is set to 'Cool' and the setpoint is below room temperature. Also verify that the outdoor coil is clean and free of debris. If issue persists, contact a technician.
How do I reset my Amana PTAC?
Unplug the unit or switch off the circuit breaker for 30 seconds, then restore power. This clears temporary errors. For persistent issues, refer to the manual for error codes.
What is the recommended thermostat setting for energy savings?
Set the thermostat to 78°F (26°C) for cooling and 68°F (20°C) for heating when the room is occupied. Use the 'Energy Saver' mode if available.
Can I install this unit myself?
The Amana PTH094K35AXXX is designed for through-wall installation. While it can be a DIY project, professional installation is recommended to ensure proper sealing and electrical connections.
What does error code 'E1' mean on my PTAC?
Error code E1 typically indicates a sensor failure. Try resetting the unit. If the code reappears, the room or coil thermistor may need replacement. Contact Amana support.
How often should I have my PTAC serviced?
Schedule professional maintenance annually before peak cooling season. This includes cleaning coils, checking refrigerant levels, and inspecting electrical components.
Does this unit have a remote control?
The PTH094K35AXXX is remote control ready (compatible with optional remote kit RCK2). Check your manual for specific remote model numbers.
What size room can this air conditioner cool?
With 9,000 BTU/h, it is suitable for rooms up to 350-400 sq ft (depending on insulation and sun exposure). For larger spaces, consider a higher capacity unit.
My unit is leaking water inside. What should I do?
Ensure the unit is installed level. Check the drain port for clogs and clean if needed. Also verify that the sleeve has proper drainage. If problem persists, contact service.
User questions about PTH094K35AXXX AMANA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual PTH094K35AXXX - AMANA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PTH094K35AXXX by AMANA.
USER MANUAL PTH094K35AXXX AMANA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMANA
Model : PTH094K35AXXX
Category : Air conditioner