SHARP

NB-JE610 - Solar panel SHARP - Free user manual and instructions

Find the device manual for free NB-JE610 SHARP in PDF.

📄 5 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SHARP NB-JE610 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type of product Solar panel
Brand Sharp
Model NB-JE610
Power output (Pmax) 400 W
Efficiency 20.5%
Open circuit voltage (Voc) 45.0 V
Short circuit current (Isc) 9.5 A
Dimensions (L x W x H) 1760 x 1050 x 35 mm
Weight 18.5 kg
Frame material Anodized aluminum
Glass type Tempered glass (3.2 mm)
Junction box IP67 rated, with bypass diodes
Connector type MC4 compatible
Maximum system voltage 1000 V DC
Operating temperature -40°C to +85°C
Warranty 25 years linear power output, 10 years product and workmanship
Certifications IEC 61215, IEC 61730, UL 1703
Snow load 5400 Pa
Wind load 2400 Pa
Cleaning method Use soft cloth and mild detergent; avoid abrasive materials
Installation orientation South-facing (Northern Hemisphere) at optimal tilt angle

Frequently Asked Questions - NB-JE610 SHARP

What is the typical power output of the Sharp NB-JE610 solar panel?
The Sharp NB-JE610 has a nominal power output of 400 W under standard test conditions (STC: 1000 W/m² irradiance, 25°C cell temperature).
How do I clean the solar panel?
Clean the panel with a soft cloth and mild detergent mixed with water. Rinse thoroughly and avoid using abrasive tools or high-pressure washers to prevent damage.
What is the recommended installation angle for this panel?
For maximum energy production, install the panel at an angle equal to your latitude (for fixed mounts) and orient it south (in the Northern Hemisphere) or north (in the Southern Hemisphere).
Does the panel include a warranty?
Yes, Sharp offers a 25-year linear power output warranty and a 10-year product and workmanship warranty for the NB-JE610.
Can I mount this panel on a flat roof?
Yes, but you will need a mounting system that tilts the panel to an appropriate angle. Ensure the mounting structure is compatible with the panel's dimensions and weight.
What are the maximum voltage and current ratings?
The open circuit voltage (Voc) is 45.0 V and the short circuit current (Isc) is 9.5 A. The maximum system voltage is 1000 V DC.
Is the panel suitable for off-grid systems?
Absolutely. The NB-JE610 can be used in off-grid and grid-tied systems, provided the charge controller or inverter is compatible with the panel's electrical specifications.
How much does the panel weigh?
Each Sharp NB-JE610 panel weighs approximately 18.5 kg (about 40.8 lbs), making it manageable for two-person installation.
What should I do if the panel is not producing power?
First, check the connections and wiring for damage or looseness. Ensure the panel is exposed to sunlight and not shaded. If problems persist, consult a professional installer or contact Sharp support.
Does the panel require any maintenance?
Routine maintenance includes cleaning the glass surface and inspecting the frame, junction box, and cables for wear. No other maintenance is typically needed.

User questions about NB-JE610 SHARP

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Solar panel in PDF format for free! Find your manual NB-JE610 - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NB-JE610 by SHARP.

USER MANUAL NB-JE610 SHARP

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SHARP

Model : NB-JE610

Category : Solar panel