VM 25 - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free VM 25 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vibration Meter |
| Brand | PCE Instruments |
| Model | VM 25 |
| Measurement Parameters | Acceleration, Velocity, Displacement |
| Frequency Range | 10 Hz to 1 kHz (typical) |
| Display | LCD, backlit |
| Power Supply | 9V battery (6F22) |
| Battery Life | Approximately 20 hours continuous use |
| Dimensions | 176 x 67 x 31 mm (approx.) |
| Weight | 290 g (including battery) |
| Functions | Data Hold, Max/Min recording, Auto Power Off |
| Accessories Included | Carrying case, magnetic probe, user manual |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Use only as specified; do not expose to extreme conditions |
| Reparability | Battery user-replaceable; other repairs by qualified personnel |
Frequently Asked Questions - VM 25 PCE Instruments
How do I turn on the PCE VM 25?
Press the POWER button located on the front panel. The device will perform a self-test and display the current reading.
What type of battery does the VM 25 use?
It uses a standard 9V battery (6F22). To replace, open the battery compartment at the back of the device.
How do I select measurement mode (acceleration, velocity, displacement)?
Press the MODE button repeatedly to cycle through Acceleration (m/s²), Velocity (mm/s), and Displacement (mm). The active unit appears on the display.
What is the frequency range of the VM 25?
The typical frequency range is 10 Hz to 1 kHz. Check the manual for exact specifications.
How do I use the data hold function?
Press the HOLD button to freeze the current reading on the display. Press again to release.
Can I record maximum and minimum values?
Yes, press the MAX/MIN button to start recording. The device will show the highest and lowest readings detected. Press again to exit.
How do I calibrate the VM 25?
The VM 25 is factory calibrated. For field calibration, use a known vibration source or send it to PCE Instruments service. Refer to the manual for details.
What does the low battery indicator look like?
A battery icon flashes on the display when the battery voltage is low. Replace the battery promptly for accurate readings.
How do I clean the device?
Use a soft, dry cloth to wipe the exterior. Do not use solvents or abrasive cleaners, and avoid getting moisture into the ports.
Where can I find the full user manual?
The manual is available in PDF on the PCE Instruments website or via the product page on notice-facile.com. You can also request a translated version.
User questions about VM 25 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual VM 25 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VM 25 by PCE Instruments.
USER MANUAL VM 25 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : VM 25
Category : Measurement