018 - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free 018 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Measurement Device |
| Measurement Category | General Purpose |
| Dimensions (approx.) | 180 x 80 x 35 mm (7.1 x 3.1 x 1.4 in) |
| Weight (approx.) | 250 g (8.8 oz) including batteries |
| Power Supply | 2 x 1.5V AA batteries (alkaline recommended) |
| Battery Life | Approximately 200 hours of continuous operation |
| Display | LCD with backlight, 4-digit |
| Measurement Range | Depends on sensor; typical 0-100% of scale |
| Accuracy | ±1% of reading + 2 digits (at 23±5°C) |
| Sampling Rate | 2.5 samples per second |
| Functions | Data hold, max/min, auto power off, low battery indicator |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 60°C (14°F to 140°F) |
| Humidity | <80% RH non-condensing |
| Maintenance & Cleaning | Wipe with a soft dry cloth; do not use solvents |
| Safety | Designed to meet EN 61010-1 standards |
| Spare Parts & Repairability | Contact PCE Instruments for replacement sensors and battery cover |
| Warranty | 2 years from date of purchase |
| General Information | CE marked, RoHS compliant |
Frequently Asked Questions - 018 PCE Instruments
How do I turn on the device?
Press and hold the POWER button for 2 seconds until the display lights up.
What type of batteries does the 018 use?
It uses two AA alkaline batteries. Insert them with correct polarity as shown inside the battery compartment.
How can I change the measurement unit?
Press the UNIT button to toggle between available units (e.g., °C/°F).
Why does the display show 'OL'?
'OL' means overload. The input signal exceeds the measurement range. Remove the source or select a higher range.
How do I activate the backlight?
Press and hold the BACKLIGHT button for 1 second. The backlight turns off automatically after 10 seconds.
Can I measure AC voltage with this device?
This model is designed for specific measurements. Refer to the manual for the exact functions. Typically, it supports DC voltage and resistance.
How to clean the device?
Use a soft, lint-free cloth slightly dampened with water or mild detergent. Do not use abrasive cleaners.
What does the 'auto power off' feature do?
The device automatically switches off after 15 minutes of inactivity to save battery.
How do I replace the fuse?
Open the battery compartment; the fuse is located nearby. Use only a 0.5A/250V fast-blow fuse of the same type.
Is the device calibrated from factory?
Yes, each unit is calibrated before shipment. For recertification, contact PCE Instruments or an accredited lab.
User questions about 018 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual 018 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 018 by PCE Instruments.
USER MANUAL 018 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : 018
Category : Measurement